Search results

Thanks and you keep it open till all the air stops coming out.. should little bits of water come out like when you bleed a radiator?

No it is fitted. I just uploaded a pic that I downloaded to show which parts I was referring to

Hi all, How do you bleed the air out of a pump for a Baxi combi 80Eco boiler. Is it by the valve of top of that pump or the big screw at the front? If it is the value on top (black valve on top of the gold colour part) do you open till water comes out like how you bleed a radiator? Thank you.

I have managed to resolve the issue, some moisture/water must have gotten into the pcb compartment/housing, making the pcb damp.. I used a hair dryer to gently warm it up to dry off any moisture and now the boiler is back to life and working fine again. As in the the following thread from 2008 -...

Thank you, with regards to the PCB, there are two versions of that for my boiler, one with 2 and another with a 3 pressure switch connection. Where on the PCB is this connection

Yes that switch goes on, both the little push rods come out on the diverter value push out and press the switches

okay, will do tonight thanks for your help

Yes, everything has been turned back on. Thanks.

yes i have and re-pressurized the boiler. This is the red light, it is a solid one and not flashing

I had the boiler switched off at the mains and the pipes closed off when changing the diverter valve

Hi all. I have a Baxi combi 80 Eco boiler, it will not ignite/light the flame after changing a leaking diverter valve. When I switch on the water water or heating I get a red light on the no flame light. Does anyone know what this means/can be causing this please? Thanks.

Just read up on this flush unit, seems like the button clip holder breaking is a common fault. Is it worth changing to a more reliable flush unit if there are any?

Thank you.

no need to take the cistern off then??

Thank you, what is the best brand to buy as the current system has been a bit of a pain?

Also can you change the flush without having to take off the cistern?

Thanks for the reply. The flush button does not push/pop back out again fully, even when the it is as in the picture. Does anyone have a link for a compatible flusher please, if playing with the wire does not help? Thanks again

Hi all, I am having problems with my toilet push button flush, where the button does not pop back out or push back out completely on its own, after flushing the loo. It is a cistern that is built-into the wall/concealed, I have taken the panel off and taken some pics of the inside of the...

Thank you. I also have a third floodlight with PIR, which is not working properly anymore, it stays permanently on now. It is that due to a fault with the PIR and is it repairable?

Hi all, I have two outside floodlights with PIR fail on me, can anyone recommend some good LED floodlights with PIR? Thanks in advance