Search results

This is a pic of the inside of boiler

Here are the two parts https://www.ebay.co.uk/itm/Baxi-Duotec-24-28-33-40-Combi-ErP-Diverter-Valve-Actuator-Motor-7216534-NEW/273188356703? https://www.ebay.co.uk/itm/Baxi-Duo-tec-Combi-24HE-28HE-33HE-40HE-Diverter-Valve-Kit-5118381-Motor-7216534/123898082947?

Thank you guys, I have another problem which i forgot to mention is that in order to get constant hot water out of the tap in the kitchen you have to put it out low pressure/not fully open the tap but in the bathroom you can open up the tap more in order to get constant hot water.. it has only...

Hi, I have an Baxi Duo-tec Combi 24 HE A boiler. When you turn on the hot water tap, the radiators get hot too despite the central heating not being selected. I have turned off all the radiators for the time being. Is it the Diverter Valve motor/3 way Valve motor (part number 7216534) that needs...

My fridge freezer is located in my kitchen.. Which is not cold at all

i never managed to get it fixed, having been using it with the bulb out :D

Hi all, All the times I have put down laminate flooring if i have used scotia trims for the edges, I have noticed in commercial properties that they don't use scotia trims but instead use wood floor sealant. Is there any disadvantages of using sealeant instead of scotia trims? What do you guys...

I have a Bosch kgv33365gb/02 fridge/freezer. Where the fridge part has become too cold, everything is freezing. the back inside panel of the fridge had frosted over. The freezer is working properly. The panel on top of the fridge does not respond to adjust the temperature. What do I need to...

Thank you. I don't have a towel rail type radiator, I only have the standard rectangular panel radiators. Do I need to only isolate one radiator, drain it via the bleed valve and fill it with the Chemical cleaner? Also topping up the system pressure is done on the boiler in the usually way...

I put a new PRV on. But there still seems slight leak of pressure dropped about 0.2 bar over 3 to 4 days. No visible leaks on the boiler. Not done the balloon trick on the external relief pipe yet. Is there anything else I need to check? The heating and hot water seems to be working fine.

Thanks, I tried the inplace cleaning but still losing pressure slowly. I have ordered a new PRV, will see if that makes any difference thanks.

the pressure is not rising into the red, but the radiators are not getting hot now. The heat flow pipe coming from the boiler is hot though as is the pump. The radiators have been bleed and valve on radiators also are open The hotwater function works perfectly fine

It did not that twice, but not this time around and i have switched the heating on and off twice.

i have just recharged the boiler to 1 bar and put the heating on.. it is dripping a drop every 2 secs or so currently on the outside pressure relief pipe

I put the heating on and it is letting out water on the outside pressure relief pipe, it is more than a drip and the pressure dropped to zero when it completely drained. What does the mean please? Thanks for your help guys

Any ideas anyone please?

No i used the drain off point, which drained the boiler of water and pressure

I changed both the diaphragms on the DHW & central heating differential valve but i did not change anything. The central heating still comes on when the hot water is on, i.e. the central heating differential valve opens when i turn on the hot water. I was not able to unscrew/take off the two...

Thanks again for your help guys it is working all fine now but i have noticed that since changing the whole pump, the pressure on the boiler slowly drops... I have to top up the pressure once every week or 2 weeks? The vent on pump is fully closed and 2 screws attaching the pump are fully...

There is no Diverter actuator for my model.. i could not find it on my boiler... see attached. My boiler is combi 80e and not a combi instant 80e