Search results

Many thanks for your time Gasescape I did replace the APS approx 6-7 yrs ago myself, wouldn't I be ok just replacing it myself again? Can't find any stockists open today tho, may have to wait until tomorrow.

Turned the HW dial fully anti-clockwise, the flashing green light went off. Then turned on the CH, but no joy. When I switched on the CH the 'info' button showed status of S.02 (pump running, pre-ignition), then S.03 (ignition sequence) + then finally S.33 (check air / flue system). Air...

Thanks for the reply Gasescape Pressed the info button + it says ' 5.23' or is it 'S.23'.......on the manual it says that display is 'Ignition sequence, warm start'.

Woke up to a New Yr boiler problem this morning Have a 12-13 yr old Vaillant 828 TurboMAX, in that time it's had a diverter valve change, air pressure switch change & timer clock change. This morning I have the green light flashing, no warning / lock out light (red light) & the amber light...

Yes you can generally put a fence up fairly close to criblock, but I would leave a 750mm to 1m gap if I was you. The criblock isn't doing too much structurally at the very top, but why risk any issues? http://www.retainingwallsnw.com/pages/multi.html# Also, dependant how exposed the area...

If it's next to the footpath of a highway then you may need to consider visibility splays also? Taken from Planning Portal - 'You will need to apply for planning permission if you wish to erect or add to a wall if it would be over 1 metre high and next to a highway used by vehicles (or the...

If only life was so simple, in my neck 'o' the woods money talks, 99% of my clients would rather use a cheaper designer & then encounter issues during the build process. I'm constantly showing examples of my previous work & explaining the value of a practicle spec & design.......it goes in...

Many thanks Freddy, much appreciated

My apologies, I've hijacked the thread

So getting back onto topic.........can you provide a link that's a bit more definitive than the document I linked to earlier? I'm on the 'mailing lists' of a few LA's but havn't recieved anything tbh, hence I thought it was sill under consultation.

Yes they do pay Freddy.

Freddy, I know I'm generally slow off the mark but I didn't realise the neighbour consultation scheme had actually come into play? I found this link, but it appears that they'e waiting for approval & it's in draft format? ...

Couldn't you negotiate? If they need your land for scaffolding / access, ask them to pay for all the remedial works.........otherwise 'sorry mate'

If that precast threshold has been wrapped with a DPC, is lapped into the DPM, if they've used suitable perimeter insulation & the door should have a suitable 'sealmaster' type level access threshold......wouldn't that be ok? Obv. the the external patio needs to be done again to ensure it...

Have to deal with a similar situation Polstar, the back of my clients place is approx 3m in depth & the front 'garden' is approx 25m depth. My client has bought the place & we presumed that the longer garden was the rear. But a 'friendly neighbour' pointed out that the 25m garden side is...

Morning all :wink: Have a detached 1960's garage with asbestos sheet roofing. Want to replace it with a corrugated sheet material. The cheapest stuff seems to be a clear PVC sheet: http://www.screwfix.com/p/corolux-corrugated-pvc-sheet-clear-762-x-3050-x-0-8mm/86161 But I'm after a...

Thanks for the reply Terox It's actually stopped working again. I've checked the plug wall socket itself & that works ok. It's got a sealed plug on the FF, so I'm gonna change the plug itself now & see if I get any joy. The appliance itself is free standing in a corner of the Kitchen...

Morning all :wink: Have got a 5yr old Zanussi Electrolux fridge freezer, little 3/4 size. Has been working 100% until last few days. It just stopped working completely a few days ago, no lights & both fridge and the freezer not working. There was no noise whatsoever from the appliance when...

Thanks for the reply guys So the best approach would be to isolate the rad, take it off to drain + check? Question is how do I check if the pipes coming into + out of the rad are blocked? Don't know if it helps.......I've got a plastic pipe system throughout the house with copper tails...