Search results

depends what the cleaner looks like

I got shares in homeserve. They make me loads

why would you need to bond plastic? is plastic a good electrical conductor?

try an insulation resistance test and a R1+R2 and report the results

why?

you said earlier that your meters dont work. I am confused

Its a tricky one. If you knew how to test it it would not be a problem. The problem as I see it is, you could call out an electrician who may tell you that you need a new shower unit thus costing the spark and a new shower or just buy a new shower anyway. Its a juggling act! BTW i am a spark and...

Call an electrician in and they will supply what is required. Alternatively learn the wiring regulations and the requirements of Part P.

Twisting can cause stresses in the copper and the cable could break. Untwisting is a pain when periodic inspecting.. The plus side is that twisting can give better readings

Has the meter been calibrated would be my first question?

Same here, I sent off 2361, 2381, 2391, ONC, HNC and mine came back with only the 16th edition and 2391. I dont think they recognise ONC or HNC either

Did you know that: A hole was dug in Rome about 10 metres deep and cables were found and it was concluded that the Romans had invented the phone! But wait The Irish dug a hole 500 metres deep and found nothing, so it was concluded that the Irish must have invented the mobile...

Simple answer: Dont turn them all on at the same time = result

I am qualified and 20 years of experience and work as an electrical inspection and tester for a large council covering everything from public toilets to major civic buildings. I work with the Part P man from the council on a daily basis. When i go home I cannot fit a socket in my kitchen without...

As you have highlighted the problem with Part P is that someone who is classed as competent needs to call in an 'expert' who could be classed as not competent. I fall into the latter case and would find it difficult to give advice to someone who was 'allowed' to do the work and get paid for it...

earth spike the genny. wheres the problem?

what do the instructions say?

And record the test readings that you get.

Use the same tester that you used as an industrial spark. There is no difference

a spirit level