Search results

Those look fine to me, whats your question sorry?

Comes as default this way.

Its a tick box in Atributes 2 of each zone. Some zone types dopnt have the otion but as long as you programmed it for exit terminaor (as suggested) it will be there. Just to say, zones on the main panel are generally accepted as being faster acting that keypad and expander zones anyway.

Led's are different as far as I can seem the guts from the 3 going into the 5 would most probably hide them, possibly the length of the leads on the sounder bit itself? Why change in the first place if I can ask? A working bell box is a working bellbox surely?

Doesnt come with built on comms, but has plug on digi card or plug in output loom. So I suppose they'd weighted up price of S8400 vs price of digi modem card and one came out cheaper than the other?

You can also get 32ohm and 50ohm speakers, but what panel do you have as most(a lot at least) have functions to turn down volume.

Basically for each wireless zone you lose a wired zone. So if you only use 16 wireless zones you can still use 3 wired expanders also. 8 on panel, 16 wireless, 24 on expanders is an example.

Sorry just had the thought you were going to say, I've done this, this, this and this to improve my speed..... then turn round and say I went with Plusnet cos they were the cheapest. :faceplant:

Mind If I ask why plusnet?

The 2 wires from the switch go into the zone section, then link the 2 tamper terminals out with a short piece of wire.

Dont see any problems there, the red dot against output 1 on your expander just means that output is active. As it's setup for 'led control' as standard from the manufacturer I'll guess it's not something your going to use, or will change at a later date to suit. Also, once a zone is 'not...

If your using all 4 wires, 2 for tamper and 2 for alarm you want to program your zone wiring as Double pole/EOL, not normally closed. It look like the backplate for a CQR panic button but im not sure and cant find any instructions online to check the right place for jumpers.

Which part of connect it to any zone you like and program it as Exit terminator(with chime) is much more complicated than messing around with areas? :cry:

1 - Yes 2 - No, Prem 48's has 3 chime options, they are all the same except the noise gets repeated once, twice or three times. (afaik) 3 - Not really much between any speakers really, go for a 16ohm speaker(which will be loud) then you have the choice of making it quieter by changing...

Thanks for the heads up. :D

Wooohooo !! Someone else that wants to join in the biggest online penis competition. Thought it had been quiet round here.

Small possibility the output polarity is set wrong, assuming it's not one of the smaller galaxy panels. So.... which galaxy is it? Usually says on the front of the endstation box.

Thats a piece of p*ss. :P Get a ricochet system, superglue a wireless sensor to your phone, have an output drive a relay on supervision failure, have the relay output to a zone programmed as keyswitch. Presto, leave your house for more than a few mins your alarm system arms. Just...

Scuse me butting in, Adrian I can't seem to find where to download the latest Wintex, Maintex etc on the new site. Am logged in as registered installer and have joined the forum to ask where to find them (newest member JohnB ) :wink: but i'm still awaiting aproval before I can post. Am I...

Wow, serious trolling over a number of different threads. Lee, just ignore these fools.