Search results

about broke me

great blog, read it all last night. I will be watching it to see how you get on so keep it up to date please.

just fitted a smith heater to my kitchen. Is a good piece of kit, put it on a seperate thermostat so I could control the room temperature in the kitchen. Would not worry much about pipe sizes (providing you are not trying to supply loads of big radiators via the one 10mm microbore branch) ...

Having a gap between plinth and unit is wrong, a gap that size is inviting vermin and muck. I peronally could not stand looking at this kitchen bodge install it sounds like you have. As been said before raising the cooker and then fitting a bigger plinth will fix this bodge. Your cooker...

lift the bonnet then go to the n/s and lift the scuttle panel at the corner (two t25 torx screws).

cheers boys, been hard work and not finnished yet! Will post pictures of the whole project when finnished, the last two pictures that I posted is where the job was this morning so still a bit to do. Starting to look good now and all the nice shiney things I bought are going in so at...

Decided to plaster spare room with the help of brotherinlaw. First attempt at plasering full wall. Slapped on the first coat that I mixed, looking good. Brotherinlaw mixed second coat and I slapped that on the wall and got flat. "MMMmmm whats that in the plaster?" Lots of little flakey...

hi newbee I read your posts and the info you got from roughcaster ect a couple of months ago as I also was about to attempt float and set about the same time. I had never done it before and learned basics from the good help here. Anyway thought I would post my experience as will help others...