Search results

Thank, yet, it has a hose running through it, perished.

The hose is not selected, all the water should be coming out of the rain shower head.

Thanks, the flow out of the rain shower head seems normal, albeit lower flow. Hardly any water leaks out when the hose shower head is selected.?!

Edit: originally though my shower diver cable had failed, after removing the hose, noticed the water is coming from outside, with a slight delay to water coming through (after turning on£ suspect there is a leak further up the pipe work. Anyone know what model this could be, how do I remove...

So getting round to replacing a blown panel in my wooden casement windows, the frames date to around 1990. Checking I’m doing it all properly, but notice a lot of threads mentioning draining slots for water on the bottom of the frame. My windows appear to simply have a wooden bead butted up to...

Thanks, I don’t believe there is an air trap, it it does it is probably hidden (the pipe is covered most of the way) . But does make sense as it seemed like quite a lot of liquid to come out of the pipe (at first I was unable to tell which direction it was coming). Pipe is around 20mm diameter...

Thanks, yeh it’s now terminal. Had a f29 also but mostly f28… .. Edit: looks like it is a blocked condensate pipe. The tube came off underneath and full of water, emptied the top end and restarted immediately. Any tips on unblocking these?! Mine has a fairly convoluted route that ends up in a...

So I have a glow worm energy 25r. Fitted about 13 Months ago, so due it’s first service. However in typical fashion, got a couple of errors today! First was just an ‘error’ I restarted and it disappeared, however this evening it displayed f28 error, restarted and ok again. not sure if related...

I read somewhere that turning off for >5mins can reset sensors etc

So, have been mulling this over for some time, I have a recessed front door, open on two sides, 2150(h)*950(w) for the side and 2150*1450 for the front where the door would go. I've had a look online but can't really find any very similar, most seem to be the large 'beams' As you can guess from...

Thanks for the reply, I have not had the F22 error since, but the boiler is still slow heating

Thanks, yes tank in the loft

its not got a feed, but cistern, and cylinder. Just been quoted £240 for a strip and clean of the heat exchanger (after £170 for the checks above). I'd note last year I had a service which included a clean of the heat exchanger for £96

Hi Just looking for some 'second opinion' or knowledge, as had someone round who failed to resolve the issue and is not clear on the cause. So I have a BG 330+, it was serviced last October (including a flush of the heat exchanger). Wednseday morning noticed a lack of hot water the other...

Literally have the same set up this end, the junction box they are box connected to seems a bit of a dogs breakfast!

So bit of an update, called him round the other day to discuss, says the tiles were far too different to match up, and he used spacers, having popped him after he had gone one of the nights he was doing it, he seemed to have some of the small white crossed, and others that looked more like bits...

Thanks yeh, the grout lines don’t match already, any wonder one side gets gradually higher than the other?!

I ordered the items (which having seen the room and the room plan, I shared the order with him) , and explained the layout, but he ultimately decided things like the overhang and the gap between units. I was at work, but my partner was at home and he didn’t discuss with her. The impression, is...

There may be a small difference, but tiles are from the same manufacturer (same range) with the same dimensions on the box (so there may be some tolerance difference) To be fair he was was recommended by several people in my village. On FB!

Tiles are the same size (image below) Not supported!