Search results

As discussed in a seperate thread I am wanting to install a towel radiator in the bathroom. I have decided on a Quinn Pearl rad in white. I am now looking for a discreet TRV to go with the rad. Most of the TRV's seem to have a large head on them, but before I make the plundge I wanted to check...

Surely the towel reduces the btu rating by X BTU's ? Thus the more output the more heat will come out of the rad when a towel is on it. I have found a Quinn towel rad which is pretty much spot on but in white. Quinn Pearl 600 x 800 (560 centres) with a BTU rating of 1668. So I think I'm going...

bump

What make of towel warmers /rads do people recommend?

The guy in the plumbing store suggested it was to do with the paint.

Hi, I have a fairly small bathroom which is basically 2 x 2 x 2.3 heigh. I would really like to swap the rad with a chrome towel rad, but I know their output is pretty poor so we are considering white rather than chrome, or paying a bit more to get a chrome rad with a better BTU. The rad was...

On the Excel you can independntly control flow rate and temperature. The picture of the other shower suggests you can only control the temperature. I have an Excel ev in our en-suite which I am very happy with and I'm looking at putting the same shower in our bathroom. I'm no expert but I...

OK thanks. For other areas where access is available I assume compression joints are the way to go ?

OK so that was a pretty silly question as I just need to connect a copper pipe into the back & use the compression joint which is included with the shower. So that leads onto my next question .... I see you can get compression elbow joints & push fits such as the following...

Hi, I'm looking at fitting a Mira Excel external valve shower into my bathroom. The plan is to cut into the wall where the shower pipes will be going & then plaster / tile over the top. Ideally I would like to fit, snap fit connectors, so I was wondering if such a connector exists. The...

Thanks for all your help. I am using a WB AI so am getting 5 years warranty included and he already included the DT10 RF in the quote too. :D I will have to ask if there are any servicing packages I can also opt for.

So looking some more at the specs these are some differences which I would like to understand... 30Cdi: Condensing in DHW mode. What advantage if any does this give me? 30Si:Built-in boiler bypass 30Cdi:No bypass required Is there a difference between the above??

OK I found the correct literature - the Technical and specification information found from these pages. 30Cdi .. http://www.worcester-bosch.co.uk/homeowner/products/gas-fired-boilers-and-systems/greenstar-30cdi/literature 30Si...

Thanks for helping me with this. WB certainly seem to come highly recommended, but I have to say their website / comparison tools are pretty poor compared to other manufacturer websites I have looked at. Anyway - back to the topic in hand. I have 11 radiators in all (2 of them are...

I've read through the litrature & can't really work out whether a 30CDi is worth the extra £80 or so over the Si. If someone can explain this to me I would really apprechiate it.