Search results

Our new build have “fan boost” switches for the extractor fans which look to me like a standard light switch. It has connections on the back going to COM and L1. I wanted to swap it for this switch with an LED indicator light on it, but it has different connections (L + N, out and L + N in) Is...

Just looking for some advice on how to fit this 150mm pull out storage basket into this tight kitchen space. I’m likely being a bit dumb but for the life of me can’t figure out how I’m supposed to drill/screw the two brackets for this inside here because of how little space there is to get in...

Apologies I wasn't sure if this would be better in the Electrics or central heating forum. I currently have a Danfoss thermostat which I wanted to switch out with the new Meross Smart one I purchased. Thinking this would be an easy swap but I've discovered the Danfoss seems to be battery...

Recently moved into a new house with a Byron chime and a basic button doorbell outside. Planned on replacing the button with a Ring Wired Doorbell but can’t get it to work at all. This is how I’ve installed the jumper cable that came with the Ring in the chime box, but I get no power to the...

Just after a bit of advice regarding the location of our electric fuse box/meter etc which has always been in what I find a bit of a strange place (above a bedroom door on the upstairs landing). I'm aware I cannot do much in regards to moving any of it myself but I wondered what the process...

Hi, Currently in our kitchen we have a fused spur switch (looks like this) which controls a straightforward light outside above our back door entrance. Is there an "easy" way to change this to an ordinary light switch, so I could make it "smart" using a smart light switch, as smart fused...

Hoping someone here can help with what are probably very basic questions. I just purchased a new 2-way light fitting (this one) for our kitchen. Currently in the kitchen it's just a standard hanging light bulb setup, which I obviously want to replace. I've just had a look and I'm aware its...

I recently purchased this motion sensored security light for outdoors. The light comes with some power cable attached (with no plug on the end), and I would like to extend this cable and then put a 5 amp wall plug on the end to plug it in indoors. The cable that is already attached to the...

Hello :) Apologies if this is in the wrong section. Currently we have a central heating and normal hot water tank system with a Danfoss FP715Si programmer box. Next week we are getting the Hive smart thermostat system which means I would like to replace the programmer with the new Hive...