Search results

Don`t know what you mean by " early " diverter valve but it is possible to change just the head on some valves this could save you potential problems draining down (losing inhibitor ) and filling back up (air locks ) as it sounds as if you have open vented system

I may be wrong but i dont think you can fix aquapanel with board adhesive it needs to be screwed directly to batons or brickwork (chec with supplier or manufacturer ) best long term solution is to : remove all plaster pva walls dot and dab with 12.5mm plasterboards use tanking kit in...

Firstly check for pipes or cables etc in areas you want to remove , plasterboard is very easy to cut with cheap wood saw, pad saw or score several times with stanley knife, would not use circ saw as very very messy. (pipes cables etc safety first)

If using trv's it is best practice to fit on flow pipe even if they are bi-directional valves, to find flow pipe turn heating on from cold then first pipe to get warm on each rad is flow , i normally leave hall (cos of room stat) and bathroom with out trv ,that is just personal preferance

Push down 1 of buttons then carefully flick 2nd button out with a flat head screwdriver, then remove 2nd button (same method ) should then see plastic screw and will be self explanitary

Have had 2 quotes from reputable established roofing contractor (birmingham area) quote 1 my house ( terraced ) remove and re-bed approx 6 mtrs ridge tiles £750 inc vat quote 2 moms house (semi deatched with hipped roof ) remove and re-bed 6 ridges across top and 2 * rows of ridge...