Search results

I have used Xtwo store plenty of times - only problem can be getting a VAT receipt if required

Nothing wrong with it in the right situation - what is there to prevent the cold water from heat gain?

The biggest shame is the pipework is actually is quite neat and shows some skill. Shame they couldn’t stretch to decent lagging. Same old story decent lagging costs more that the pipe and no one prices for lagging its just an after thought.

Too late now, but at least run it around the perimeter rather than middle of floor. Not sure id want a hw loop running though there - thats the biggest leaker. Nice to see some quality insulation on that pipework

You have all that under the ufh- bloody hell. Did they know ufh was going ontop of that lot?

Whats the spec and where are you based in the country?

looks like the OP has been after a boiler for the last year judging by the related threads

I personally think any business that provides controlled building services eg. gas,electrical etc should be VAT reg as part of their conditions of registration - a level playing field. Are the VAT savings ever passed on - I doubt it, the same rates are charged

If you are happy with the guy and know his work and reputation then not a problem. Bear in mind if you "supply" the installer can fit and forget and you don't have much recourse if you have any problems.

Have you had any quotations from VAT registered installers? If so how much cheaper is the non vat one?

What about adding solenoids to cyl cold feeds,link solenoids via high limit float switch. Or just single solenoid depending on main incoming pipe size

Any reasonable quality WC seat is going to be £40/45, pay your money take your choice. Sottini has always been fairly pricey, but cheap compared to some. I've fitted a few seats that have been £800+

Price looks about right for a wc specific seat.

Second time I've seen an install like it

The gas regs don't say anything about this as I would have though the electrics would be more of a concern. So I have a boiler installed in zone 1 above a bath - you would have to stand in the end of the bath to be in front of the boiler. The boiler has a rating of IPX4D and is not in a housing...

It's a shower with integral pump that uses low pressure hot and cold feeds

This is not an electric shower

This is a cistern fed unit

a WB 42 CDI is good, but is it worth the 40-50% premium over a Vouge..... No. I fit loads of Vogues and loads of WB. If the customer asks for WB then that's what they get, if they don't specify then I quote for a Vogue. No faults or complaints yet after 5 years of fitting them and maintaining...

Scope of delivery - Actuator (the button), hose, Pneumatic flushing device (the internal adaptor for the flush valve), Fastening material (the backnut). The "Pneumatic flushing device" replaces the top part of the flush valve, not the whole valve