Search results

  1. W

    fitting copper pipes to taps

    any tips on fitting a rigid copper pipe right up to the tail of the tap, like bending and cutting the pipe to the right position ?
  2. W

    fitting basin taps

    what do i use to pack out the tail of the tap when fitting to a basin , as the hole in the basin is a lot bigger than the tail on the tap
  3. W

    taps positioning

    is there a wrong a right side for the hot and cold taps, my cold is on the left
  4. W

    b & q winchester suite mixer taps

    just bought a b & q winchester suite with mixer taps wich are conected underneath by a flexi pipe , but the pipes seems to long to connect to all the taps without kinking the pipe , same problem with the bath. anyone else ever fitted one of these suites
  5. W

    bathroom sealant

    is there any difference between bath and shower sealant and silicon sealant
  6. W

    tiling newly skimmed wall

    im tiling newly skimmed wall, how long do i have to leave the plaster to dry and will i need to give it a coat of anything to seal the new plaster,
  7. W

    tap connecters

    1/2 " the sort that fit on the bottom of the tap and have a sort of olive on them. im no pro but last time a recconected a tap i couldnt get it to stop leaking without putting ptf tape round the olive thingy
  8. W

    drilling tap holes in bath

    i need to drill holes in my plastic bath about 3/4 " , what is the best drill bit for doing this
  9. W

    tap connecters

    do i need to put any jointing compound or ptf on them and are they reusable
  10. W

    copper pipe measurements

    is metric pipe measured on the outer bore , and imperial on the inner. i think some of the old pipe in my hous is 3/4 " what do i need to connect it to 22mm
  11. W

    laminate floor in bathroom

    going to fit laminate floor in bathroom, would you recomend fitting the loo and pedastel on top or fit it to the floor boards then cut round them.
  12. W

    levelling a bath

    just about to fit a new bath, do i have to raise the feet at the end furthest from the drain or will the water flow out if the bath is level
  13. W

    draining down

    thanks for that chaps
  14. W

    draining down

    sorry people ,what im trying to do is just drain down the water from the bathroom basin and bath if i need to solder any new joints, not the central heating system
  15. W

    compression fittings

    do i need to use jointing compound on the olives when using compression fittings ?
  16. W

    tiling

    i am just fitting anew bathroom , would it be best to tile the wall before fitting the basin , toilet cistern and bath or fitting them to the wall then tile round them. thanks
  17. W

    draining down

    whats the best way of draining down the water from the upstairs water pipes without a drain cock,
  18. W

    sink pedastel

    im about to fit a new sink with a pedatel, do i need to bed the sink on to the pedastel with any sort of putty
Back
Top