Search results

I have three problems to sough out as I have sold my house but these things need attending to: The first is the shower-It is remaining on when it has supposedly turned off! It works fine but water is still coming out in the off position-its a Croydex venturi VSI-rubbish I know but it works if...

sorry about that-not well at the moment.............

I have three problems to sough out as I have sold my house but these things need attending to: The first is the shower-It is remaining on when it has supposedly turned off! It works fine but water is still coming out in the off position-its a Croydex venturi VSI-crap I know but it works if u...

OK Chris thanks for that-Its a waste,ok:oops: Do u know what its called so I can search on the net for it? Looking at the image u obviously screw it in but do u need a sealant between the waste (lower part) that connects underneath to the actual sink itself?

When u mean a new one do u mean I would need to get the whole unit that is the steel cap part and therefore re-screw in a new one-the only problem with that as stated is the trap has come off completely ( I presume the seal) and is being propped at this stage-if I let go it will come away all...

Unfortunately I think u are right-there was a screw in the middle of the plug hole and that has gone! So now what!? :shock:

The trap below the kitchen sink has come away and is therefore leaking. Is there a way of adhering it back to the actual steel sink unit? presume u use some form of sealant but what? cheers for any advice! :(

Ok-thanks for that-Yes the groat line for grip or tape-should be no problem,cheers for that!

I want to install a new shower head and rail-I will need to drill a hole through the ceramic wall tile. Obviously u use a drill but what type? Is there a special one to get as the drill will no doubt slip if I use a "normal" drill bit-cheers for any advice

were is the thermostat located and how could it be tested-cheers :P

I think its the element as I just found this: "my proline dishwasher pdw080 is stoping about a quarter of away into cycle and the same near the end , you have to move it on manually , dishes are not very hot and no steam when open dishwasher when finished ,been told its the thermostat sender...

My Proline dishwasher is not working properly-the dial gets stuck and I have to move it on myself-also there appears no steam or heating coming from it either

Well good luck-it sounds worse than my situation-well I've read up abit today-found stopcock under kitchen sink cant even turn it! Good start-probably need a wrench-I haven't gone into the loft yet-i will have to turn off a valve up there too-I will also have to move the exposed pipes back into...

Hi Blair I have the same problem and I am about to embark on replacing the shower for the first time too! I have purcahsed a new team Jetstream venturi shower-I was going for the trevi boost but this one became available-so I am researching the project this week and softus has good advice-I...

Update} I have purchased a new team jetstream for £156-I think thats a good price-the problem is I have to put it in! I have ordered it so it should be arriving-Softus I will keep u informed but this could take time-I wont do anything untill I have completely researched the installation...

Bab-who much would it cost to do the Polyplumb overlay system and insulation boards? Can this be done yourself or do u need a specialist? size 9x 10 foot space.

Thanks Icgs-yeah I thougt it was something on those lines-what do u think if we just use a mobile oil filled rad? Is there anything else we could use?

Bahco-dont u need planning when u add a radiator to a conservatory or is it just building regs? -we have no heating in the conservatory ourselves-underfloor is a definate consideration :wink:

do u need planning permission for underfloor heating? Central heating u do.

I think I will be getting one even though someone said its a lump of plastic! I am getting he presure tested first-Its probable alright but its a precautionary measure. I will let u know but this could take time-it looks pipes will have to be moved as u can come from the back and the bottom but...