Search results

The instructions are pretty lame, just two diagrams one show clips pushed up prior to fitting and the a picture of the unit in the hole with the clips down. The clips of course were pulled back as otherwise it wouldnt go in. Are there any alternative methods of fitting these as one as taken...

secures its plasterboard skimmed. I've positioned the light unit as such to avoid hitting any joists, to make sure I've checked too. btw what method should I use to fit these fittings as the springy clips are waaaaay too fiddly thanks

snap lol ive just been looking at some primed MDF and it is miles cheaper and to be honest looks nice too. Im probably going to collect some tomorrow

Could it be used for the time being though. If it does the job at least for around 4-5 months id be happy enough as i will replace it with some ftp cable later anyway so all components shall be of the same grade

Hi guys I purchased some large recessed downlights which take two energy saver bulbs. Ive wired them and everything and they look the part once switched on. I am now trying to fit these into the hole I made and am having two issues. First of all the springy clips come out of place all the time...

btw i just realised that the new cable is stranded unlike the ftp cable which was solid core. My mate said it should make a difference Also the cable i got at the suppliers never mentioned Cat5e, just cat5 even on the box it says Level 5/category 5 and mentions Data Grade a lot. On the...

they vary to be honest but on average they are less than 10MB

actually guys its for my business premises i need a cheap option as we are beyond the budget kept for the project

To be honest I had a side budget set for the network which im sure was healthy enough for an above average network but since the downstairs floor collapsed and a few other little issues, we really pushed past the budget. The data to be shared is predominately vector art but in cases 3d...

The issue is, ive practically run out of money that was allocated to this premises of mine. I set a budget and ive gone over board due to some unforseen circumstances and i havent even got my reception counter in yet. But lets say for example, that although the pc's are very powerful would...

o i was referrin to modules as the points where the ethernet access is going to be, and the panel where all the cables are terminated into in the data cabinet

Well the PC side of things i am going for most optimal systems due to the nature of the business i.e. heavy graphic design

well to be honest the module are not really what im bothered about, where you mentioned STP/FTP patch panels I was hoping I dont need to get two. Bare in mind this is a quick DIY Jobby of a network. Ill tell you this much though, ive learnt a lot over the last two weeks in relation to setting...

By asking what speeds, is this something I can control Drgl?

drgl the power cables were put in place a long time ago. At the time my intention was to go with wireless due to ease of setting up hwoever i realised with wireless there is always an issue with data transfer. This wired network was decided later by myself and since there are limited areas...

As title guys, a friend of mine has told me that it looks really nice and although a little expensive to buy there is little maintenance afterwards. My only concern is open ends for example where the baluster meets the wall the skirting needs to stop before hand and somehow the end needs to...

DRGL, the reason I opted for this method was due to concerns several people had with the possibility of my cat5e running parrallel to power cable, hence possibility of interference. Secondly, yes the cable is already in place. Regarding too expensive of an install, well the cable ive...

Nup no access to a certifier however do have a friend who is a network specialist for YBS

Hi guys I have a building with various angles and am at a stage where i need to add skirting. I was wanting to know how best to measure the angle if it is required and likewise how best to cut the edges of the skirting without too much hastle. thanks

hi guys i realised after fishing some cat5e cable around my building that there appeared a few kinks. Basically the cable must have gone into a small loop and straightened out leaving a kink. The sheath seems fine and there isnt any sign of extensive damage but was wondering if this would hamper...