Search results

So far the situation hasn't improved. I've also tested the thermal cut out switch on top of the element but this seems fine too. If I've not explained the problem clearly then feel free to let me know. Thanks again Jaysta

Is it going into a loop when you leave it to boot normally or when you select safe mode? I would try safe mode and post back here with what happens.

Assuming you can play mp3s or other sound files successfully it sounds like Adobe Flash needs a reinstall although I'm not confident this is the cause as I think ITVPlayer uses MS Silverlight. When you do the reinstall, ensure to untick any toolbars it offers to install. I upgraded Adobe...

Hi there, I'm trying to figure out a problem with a shower at my dad's new house. He has a Galaxy Designa DS3000 10.5kW shower and it won't start unless you put it on cold setting for temperature and cold for power too. Once started at cold, you can then change the power to low or high...

Hey iwaters, Thanks for the heads up about letting insurance know. I'll give them a call. About the space saver tyres though... I thought that while they maybe thinner they are still same the diameter. My spare is possibly an inch shorter in height/diameter. Can anyone confirm if their...

I have put alloy wheels on my car which are 15" rims with 195/60 R15 tyres on. The previous standard steel wheels were 14" with 175/60 R14 tyres on. My spare is the 14" standard wheel. Over the weekend coming back from the lakes I had a flat tyre on one of my alloys and replaced it with...

Ok, thanks a lot guys. :) I'll try the Polyfilla fine stuff maybe and go for final colour perhaps.

Hi guys, I've recently had my main bedroom walls and ceiling, boarded out and skimmed. I waited for the plaster to dry out proper like about 3 weeks I think. After doing a fair amount of research I went down the line of doing a mist coat with trade matt emulsion watered down by 20%...

Cheers Andy, So I'm assuming that I've got to drain the boiler though? There doesn't seem to be a Worcester part no for this though so will a universal one do the job? Thanks again, Jay

I already know that the diverter valve is at fault. All I'm asking is if the diaphragm is easy to replace or not? i.e. could I replace the diaphragm without draining the boiler? Again, any replies appreciated. Thanks, Jay

Any other replies most welcome. Is it easy to replace the diaphragm as suggested in the other post? Thanks

Hi guys, We have been experiencing issues with hot water for the past week in that we have had to turn the hot water tap on a lot more to get the boiler to turn on and supply hot water (when the central heating is off). When the central heating is on the hot water comes through but not as hot...

Thanks denso. That's one thing I haven't checked. I'll check the roof from outside to see if there's sign of tiles being lifted or indeed sagging. What does capping mean? You mean all four purlins? One thing that has been mentioned to me as an idea, which I'm wondering if John is talking...

Any advance on metal straps? For metal straps... would I then have to somehow compress the purlin first before fastening metal strips to the purlin or just bolt metal strips to the purlin as it is now? What spec should the metal strips be? I've emailed local BCO about this and attached...

The crack is .25" or 1cm in depth

This is the crack from the back of the lower purlin

Towards the end of crack

Start of crack

Middle of crack

Front part of roof with upper and lower purlins. Lower purlin being the culprit.