Search results

Is there another insulation product that will offer as good a thermal value as 270mm of fibreglass but with less thickness? I only ask because I'd like the benifits of the better insulation but can't really raise the loft boarding by the 8" required as I assume that all that extra timber used...

hi freddy, so just screw through the 3x2" into the joist?

Hi, I have a house bulit Circa 1999/2000 that has had pretty much all of the loft space boarded over, as 8'x4' boards have been used it must have been done by the builder. I thought this was great till I happened to notice that there is maybe only 50mm fibre glass underneath that doesn't cover...

Hi again, thanks for all the replies! I've had a look at the Kamco website and read the detialed instructions, whilst I'm sure I could do it there are a few things that are contradictory in the instructions. What i have done is added sentinal x400 to the system and run it for a week and...

Hi again, The sytem is open vented with a water cylinder the pipe work is microbore and the house is around 7yrs old and I have lived in it for the last three. The offending rad is in the downstairs toilet and has never worked, I had assumed it was a thermostatic rad valve that had stuck but...

Hi, My heating system is not functioning properly, a couple of rads don't heat up. initially I thought it was down to a faulty Thermostatic valve, however after removing the valve finding a load of rusty gunge in the water I think it is actually a sludge problem. Power flushing would seem to...