Search results

Funny enough have been looking at: http://www.screwfix.com/p/stuart-turner-monsoon-u-positive-negative-head-shower-pump-3-0bar/79703 Anything i need to be aware of before purchasing - more expensive than the others but seem very highly rated.

Hi all Currently have a Grundfos STL - 1.0c Shower pump, we live in a flat and have a hot water cylinder and cold water tank which are both below the shower outlet, this pump also pumps hot water to the kitchen tap and hot / cold water to the bathroom sink so it does alot of work! It seems to...

Will take A look at that - now you say it it does sound like air in the system when you turn on the taps sometimes If this is the case is there any way to improve it easily?

hi all Having an issue with our hot water. In our system we have a hot water cylinder and cold water tank. We are in a flat so the pressure isn't great from the tanks so there is a pump which increases the pressure on the hot water tap in the kitchen, the bath and bathroom sink mixer. The...

Thank you - do you recommend i tile straight onto the concrete floor or will i need to lay some sort of membrane first - seems to be all sorts of different opinions around!

Hi all Just wondering if anyone with experience in laying Porcelain tiles can guide me if this is a DIY job or not, the area is around 8 square meters and have had prices of up to £500 to just lay the tiles with no materials so am half tempted to give it a go my self! They are quite large...

Great thanks sounds easy enough - currently there are 2 cables in 1 (the grey and white ones) - i assume i can put these 2 into a choc block and a wire from there to number 4 i the heat link? Thanks for your help again!

Hi All! Almost a year on and im here again! Thanks to your help last time we've had nest up and running all year with no issues atall, with them announcing the 3rd Gen with hot water control we've ordered that and managed to sell our current nest already which is great. Now im after some help...

Just done that and its all up and running - Thank you so much - Saved me alot of money there getting it installed. Reused the old Thermostat cable into T-1 and T-2 to power the Nest Thermostat. Appreciate all the help :) Marc

Ok done some more searching! This is the existing thermostat which is in the living room wired as it has been. This seems to be the other end where the programmer is (the white cable with the blue wire with yellow tape around it) The Yellow cable from the Thermostat goes into a...

Oops my bad i meant to say to replace the heating element of the controls and the C27 will remain in place controlling the hot water - problem im having is finding there to connect the heat link into the existing cabling.

Hi all, We have bought a new Nest Thermostat to replace our current Horstmann C27 which runs our Central heating and Hot Water on a timed system, we have a Netaheat Profile 303 Boiler. Having a few issues wireing in the Nest Heatlink - mainly trying to work otu what the current Common and...