Search results

I have a Signature 7Kw Inset multi-fuel fire, I am wanting it to be installed in a wooden fire surround with a marble hearth and fire panel, thing is I am being told different things by the installers who have been round up to now, one says its would be better if the marble was "slabbed" another...

I will try, will you try to use the shift key and a bit of punctuation? :wink: Nick.

If you don't move back and forth why would you need to keep changing it. Nick.

Not really, but as you live in the states firstly I would prob ignore any advice you offer as you have different rules/regs & systems to us, and secondly I would not offer you any advice for the same reason :lol: Nick.

Why do most people on here wish they lived somewhere else? If ever I move away from Derbyshire, I shall no doubt edit my profile to show the new details, but until then it stays as Derbyshire. Maybe it it just me that has noticed.. Nick.

I use one of these on holes, they are very good, but have not tried them on conduit. http://www.screwfix.com/search.do?fh_search=Deburring&cm_mmc=Google-_-Hand%20Tools-_-Plumbing%20Tools%20-%20Pipe%20Cleaning%208%20Deburring-_-Deburring?P=P&gclid=CPuXjIfox5kCFQG7GgodnhCOuA&source=aw...

Press in, turn to left (anticlockwise) to unplug (dis-connect) Remember:- Lefty loosey Righty Tighty :D Nick.

Have you got the details for the DVR? Thanks Nick.

Have you downloaded the user manual from the link in my earlier post? You can reset the router and then connect to it using a patch cable and configure it to suit your needs, ther is no password for admin when the router leaves the factory. Nick.

Are you searching for Activa or Ativa Cos one is a yoghurt and one is a router :D Nick.

Here you go http://www.ativasupport.com/product/?pid=AWGR54 Nick.

But can the motherboard/bios support more than 1Gb of memory? Nick.

Try here:- http://www.memory-express.co.uk/ You can put in the make and model of your pc, it will tell you how much memory you can add and what type. Nick.

Would be better as the first switch in series, as it will go into test mode when power is first applied to it. Nick.

If you do disconnect the immersion heater, put the cores into a connector block, otherwise you will have bare live cables next to earthed copper. You could also use the connectors to remove the timer from the circuit, to check immersion heater without the timer. Nick.

When I change a lamp, I generally wet both my hands, stand in a bucket of salt water, remove the old lamp, check that there are no obstructions (using my wet hands) then if I can still focus, I fit the new lamp... Nick.

Hi, I am assuming you are meaning occupation detectors, we have those fitted to out hall and landing lights, they are in parrallel to the existing switches, so if needed we can over-ride the sensor and have the lights on "manually" if we want to, they are good. I ran a cable from the rose to...

Because I am being realistic, I know that my speed does vary when in town, so I won't say I am always doing 30Mph or under. The only places my speed does not vary is on dual carriageways and motorways as then I use cruise control.

I drive about 30,000 miles a year for work in the van (and it is a "quick" van, Astra Sportive), I drive it like I stole it when I am going cross country, but would never drive at over 35Mph in a 30 limit, there are too many risks involved, pedestrians etc. Last year I also rode 4,500 miles...

To keep it cool, lay the glass down flat, build a wall around the area of the hole with putty, then fill that with the coolant/lubricant of your choice. Nick.