Search results

Why not contact your local council, most councils have a telecare alarm service. That are available 24/7 as if she falls you may be unavailable or have your phone switched off so it would be better for her. My nan has telecare system installed by the council as she had a stroke and is very...

Hi Bobballs I use Y Cam IP cameras on my house, there is a Y Cam SD which i have on the front garden, where there is an on board SD Card can record on motion detection. So you can download directly from the camera if needed. They also have a multiview software that can record & see all...

If the wire is or is to become damaged :lol: on the outside this is free as its the property of bt. when i moved into my house the wire was cut at the top of the house near the guttering, I called bt & new line and master socket was installed free of charge. If its on the inside this is...

Hi bearhug, check to see if jamming detection is programmed to class 6 (30/60). If it its not program this setting and this may solve the issue :D

Hi timtim, You can use ssaib or nsi if you wish however this is not essential as there are also good unapproved alarm installers out there here are some local & national installers. http://www.acesecurity.co.uk/ http://www.matrixsecuritysystems.co.uk/ http://www.alarm-monitoring.co.uk/...

Hi timtim, would recommend getting a local engineer in to take over the system, As if you have a line fault on the alarm it may stop you from setting the system, Also its probably fitted with a dummy bell box so when it triggers nobody will know apart from the person breaking in. Would recommend...

Hi, Sajio if the installer is happy to fit your own equipment then thats good. However ask him if he could provide service & maintainance contract on your system you will have to pay extra. But its worth it for any emergency faults & you wouldnt have to pay a call out fee. Usually around £70 to...

Yes its filtered, Its on a BT plug & plugs directly in with the other phones so if a phone is off the hook it will not dial out, im ok with this as very unlikely to happen , Will send some open & close signals tonight and see if the arc receive them. It seems dial out ok its just strange it...

Hi, Sajio you can get wireless receivers that can hardwire in to any alarm panel visonic & risco do some, however i have never used them as my system is all hardwired. If the guy you are using to fit your alarm can program a galaxy then he should be able to fit and program a veritas. Its like a...

Hi guys I have added a phone line extension, and moved my router & phone The phone & digicom are filtered, When i dial out on my phone and hang up everything is ok, However when the digital communicator dials out it sends its data as normal but when it hangs up after communication my broadband...

The MCB is BS16 and i think the cable is 1.5 but not sure as can not see any writing on it.

Hi paul, Yes the cable comes from the consumer unit into the fused spur, then cable from spur into alarm panel. I take it thats ok

That should be fine then as it comes directly from the consumer unit and only has the alarm system connected. I didn't want to do something that was unsafe. :D Edit - Just seen johns post above, I have a internet router with normal power adapter will this still be ok[/code]

So i take it that its safe to extend from the mains supply side of the FCU to my socket ?

probably will not do that then, Is this ok to do. Wire from existing FCU mains side to a new 13amp FCU then connect load side from new FCU to the socket

If i change to a 13 amp fuse would it be ok to run socket & alarm

Hello, I am wondering is it ok to wire a socket from inside an existing fuse spur that powers my intruder alarm, Would only be running a router of it & possibly a lamp, Was going to wire in consumer unit but getting a bit tight on space. Thanks in advance :D