Search results

Hi, We're re-fitting our kitchen and when we removed the tiles it took off the plasterboard which was dot and dabbed onto the walls behind them. At this point the holes have been filled with a bonding agent (on advice from a plasterer who told us it would be fine to tile over) I've...

Had though about it, we have a 10.5 kw one and they seem quite expensive (around 250). Is it possible to replace it with a cheaper 8.5 kw shower without replacing any of the electrics ?

Hi, Our shower seems to be struggling to heat water, especially now as the temperature outside is dropping. It will only heat to about 40'c max. Is there some kind of heating element inside which needs to be replaced? It's a Triton Topaz t100si Mark

Hi, Recently our Triton Topaz t100si shower started prodding low pressure when they temperature is about 40'c. If I turn the shower down to it's lowest setting about 30'c the pressure is very strong. Does this indicate the shower cannot heat the water fast enough to keep the pressure...

No the switch didn't work the pull cord didn't click when it as pulled...

Done

Hi, Just wanted a second opinion. For the last few month the 50amp ceiling switch has been left on, pulling the cord didn't work and I didn't get around o fixing it. This weekend I changed the Triton Display Thermistor & the Outlet Pipe from our Triton Topaz t100si shower (see this...

Hi, Just wanted a second opinion. For the last few month the 50amp ceiling switch has been left on, pulling the cord didn't work and I didn't get around o fixing it. This weekend I changed the Triton Display Thermistor & the Outlet Pipe from our Triton Topaz t100si shower (see this...

Hi, My Triton Topaz t100si has stopped displaying the temperature saying NC. After doing some research on here found it was the Triton Display Thermistor which probably needed replacing which I've now received. Looking inside the shower there is corrosion around the plate the Thermistor...

Hi, A couple of radiators are staying cold when the motorised valve is set to CH & DHW. If it’s set in the CH position the radiators heat to full heat. I’ve replaced the pump and had a power flush and all radiators have been bled. I have a three way Myson motorised valve (MPE322). It...

I have bought a new radiator - I should have really put that on this thread to avoid confusing people :shock: doh

Thanks ! :P

Hi, I'm going to replace a couple of rads which don't have bleed valves. I've bought the radiators and I think the holes are blocked currently but I don't see how to remove the caps. I did try an allen key but it doesn't seem to fit properly. What am I missing? Thanks in advance...

Hi, Two of our radiactors are cold at the top and need bleeding but there doesn't appear to be a bleed valve. I've added some photos to show this. Does it look like the valve has been snapped off? (There is also nothing around the back of the radiator that I can see) (had to use...

Thanks wasn't sure and wanted a second opinion, I'll ask him to get flushing.

Hi, I've had a quote from registered gas safe plumber to do a power flush (£250 exec VAT) which seems pretty good. However he said he'd be sending his colleague to do it, when I asked if he was gas safe registered he's said no but it's not required for doing a power flush. Was he telling...

well i really appreciate your efforts, I know it's pretty difficult trying to diagnoise these things over the net.

the pipe on the left hand side coming from the bottom of the cylinder doesn't have a handle on it. I've attached a few more photos if you have any other ideas...

my mistake I meant to say it was fully open, I followed your suggestion and made it half open and the radiator didn't heat up. I've attached a couple of pictures and highllighted the handle im talking about.

yep it was completly closed, I have tried closing it half way and the rad doesn't heat up... :(