Search results

the wires are connected to the bulb holder with a push fit connector, bit like a mini scart connector. The bulbs were working fine last week, and the cars in good nick. I couldnt see any rust on the connectors. The bulbs have only 1 soldered point at the bottom.

How do i do this? :oops: not really done much work on cars!

Hi Both my brake lights have gone out, but the third light works ok. I changed the bulbs but same problem. I have no idea what the fault could be. Has anyone come across this before? Car is Seat Leon S, 2003 plate, 1.6 5 door. Petrol. Thanks

Firstly I have a wide circle of friends who are property landlords, Secondly I am currently on a Gas Course which will get me the ACS and Gas safe certified. With this in mind and a number of friends who are landlords, i get asked to look at a lot of issues involving plumbing, boilers etc. I...

rated people are a load of nonsense. Joined them for 3 months, got a couple of leads, didnt get the jobs even though i quoted low. As far as im concerned, this is for tradesmen desperate for work.

This may seem a silly question, but could i use the DHW sensor from a heatline vizo 24? I got a scrap vizo boiler a while back and was wondering if this would work on the hydroline boiler?

Thanks for the advice, much appreciated. Ive tried srarching for the manual online, but nobody has it, seems impossible to get hold off.

http://www.gas-spares.co.uk/m/Catalogue/HEATLINE-BOILER-SPARES/HEATLINE-Original-spares-HE/SENSOR-DHW-NTC-screw-in Does it look like this? If so, do i change this part? Is their a particular procedure to follow, ie drain down system etc?

Hi guys, was hoping one of the boiler experts could advise. A friends got a Hydro Line b24 combi boiler. Its build looks similar to the heatline range of boilers. I've got a flashing red light on 40c (the 3rd light up from the bottom). On the label on the side of the boiler, it says if...

thanks for the replies lads. Solved problem, it was a loose neutral connection in the socket! changed socket, problem solved. Also bathroom light was not working. Checked light, fine, but no power. So opened up pull cord switch and the prat who fit it did not bother to fit a screw...

so would the things he has mentioned be something we should look into? or disregard it?

Hi all, ive had a building survey dont on a 1930s property in london, and the surveyour mentioned these commnets on the report. However as i am not a buildings expert i'm not sure as to what they mean and how serious they are... "Instruct a Timber specialist company to inspect all concealed...

thank you. I'm on a plumbing course at college, level 2, and they are saying all new baths and bath taps must have these fitted by law, even if its an old property. Is this correct?

Hi guys I recall a few years back new legislation coming into affect which stated that bath water must not exceed 60c, so new builds had to have blender valves fitted. However does this apply to existing properties? and if so, where can I find this info? ive searched online but nothing...

thanks for the replies lads. He had a dishwasher plugged into it, but it burnt the plug out. So he plugged in an extension lead and this too got burnt out. the housing for the socket goes into the wall, , so the socket is pretty much flat with the wall, not sure if this causes...

been to a mates where he is having an unusual problem with one socket which keeps melting the plugs he plugs into it. This has only recently started happening. Its a single socket in the kitchen. Does anyone know what could be causing this?

I have a problem on a friends Worcester boiler. 2 years old, but hot water not working. Was working fine apart from low pressure on one hot tap, so we had boiler man out, he fiddled around, but after he left boiler not working. We called him out and he could not find fault. He said best to call...