Search results

My Page 18 is about the RS485 wiring! What's the text consist of so I can 'search'? Will try that tomorrow when I return to finish commissioning.

I've just changed an old Pyronix Paragon Plus out for a Galaxy 2-12 after 18 years faithful service, but the two 16 ohm speakers wired in parallel to give 8 ohm on the speaker output are really quiet despite option 51-10 being set to max at 31. Does anyone know what impedance the Galaxy is...

That's exactly what it is, the term 'back drop' is what the last guy who came out to jet it called it. It's all come flooding back now. If it's usual for some water to come out if there's no bung in, then that's fine. Since the water saving cistern has been installed, it blocks more often...

House was built in the early 80's I believe. Would that still sound right?

My mother-in-law has a drop drain at the front of her house, and it occasionally gets blocked. There are two outlets, one at the bottom of the inspection chamber, that lies at the same level as the main drain, and another outlet approx half way up the chamber. At the moment, when you flush...

Thanks for that great reply. Ethernet module - do you have a link to what its capabilities are? Can the alarm itself be set/unset/reset or its status found as well as emails on activation? Is the control done via internet browser?

Is there a covert zone setting in those panels, which allows you to monitor the room as far as the event log goes, but not actually activate the alarm?

Hello Can anyone tell me what the on-board dialer in a Galaxy 2-20 panel does? Is it like a voice dialer that gives a verbal message when answered like an external voice dialer, or is it more tones / data for linking up to a monitoring station rather than ringing mobile phones etc?

Thanks - 51.55.3 - perfect. Another one committed to the memory banks. All working 100% now. I have an additional prox RKP that I bought for the garage(yet to be installed) so I can start coming in that way too, and be able to unset the alarm. From what I can understand so far, the...

Are we saying that the panel cannot work as a standard keypad with no prox? I don't quite understand why I can unset if the final zone has not been activated, but not if it has. We had a Galaxy panel where I used to work, and we had no prox, but could set / unset the panel from the keypad.

Graded as in Grade 2 or Grade 3, or graded as in second hand off eBay? It's a brand new panel with a Mk7 non prox keypad.

OK - I think I'm being a dumb ass here - Cue sarky re-post comments..... Zones named and programmed for full and night set. Master user code still 1234. Sets OK with 1234A, and 1234B2 for night. If I let it set, and then type 1234ENT without triggering a final zone it unsets OK. If I...

Thanks SocDesign - steep learning curve, but getting less so now! Europlex - Yes, I have a manual.

Weird - Just done a full power cycle, 230v and battery off, re-started, and it all works OK, and all faults have cleared!

Thanks - done that twice (and set to yes too), and still comes up as fault with exiting engineer mode. Also, have '+CU AC 0002' as a second fault.

I'm just programming my first Galaxy 2-12 panel, and cannot see how to disable the fact that there's no phone line connected to the unit. Any pointers?

Cheers guys. Is there somewhere on-line where I can get on of these thermistors that is likely to be a suitable generic part? Typing 'thermistor' into Google brings up a large variety of different parts, some of which it appears are for temperature flow in DHW etc. In the control systems...

Is the external temperature sensor connection on a boiler effectively just a variable resistance reader, or voltage sensor, or do they vary with manufacturer? I have a Lamborghini Extrema 38C combi (yeah yeah - crap I know, but you telling me isn't going to make me throw it away and buy a...

It's because the kitchen doesn't have a TRV, and also has doors leading to a conservatory that quite often lets cold air in; the stat in the hall wouldn't really react to that. I'm zoning a load of other stuff at the same time, so for the sake of another £100 I may as well put it on its own...

I'm looking to upgrade my panel to allow more zones and flexibility, and the trade counter have suggested a Galaxy 2-20 as I need 'about' 10-12 zones. I know the Galaxy panels are good and will probably get one, but before I do I wondered if anyone had any comments or alternative suggestions?