Search results

I've Open Windows Explorer got to the setup program setup.exe on the CD. Right click on the program and click properties. I only have the tabs for General and Netware Version. No Compatibilty tab. If I copy the setup.exe to root of c: I still have same options plus a Security tab. Checking...

I have some children's s/w from DK. Its works fine on win95. The s/w is old, and states only 95/98 compatible. I have tried to install it on win2000 and its reports that I do not have enough disk space. It requires about a stated "1,300,000Kb" (!) free. Well the disk has 10Gb free. I'm assuming...

O yes. Turning on the shower without the pump on, and you can shower completely (say 10 mins), in lovely hot water. Even with the pump powered up, the temperature of the water remains the same. It is not the case that its ok to begin with and then cools. It just cool to start with, and remains...

I Moved into a house, where the main bathroom has an Aqualisa power shower fitted. The pump is a 654DE 3bar pump. The problem I have is that while pressure is not a problem(its too much really), temperature is a problem. Its not hot enough. If I turn off the power to the pump, so that the...

Get a kid.... He came home, sometime back. The local fire and rescue men had been visiting the school. Amongst other things such as feeling a door for heat, crawling on the floor etc. they told of CO and smoke detectors. HE kept on and on at me so I got one.... Now he's on to me EVERY...

Update on this. I got the belt sander from screwfix, and it worked a dream. But make sure the bag does not fill up and I wore a mask also, as dust goes everywhere. Recommend it and the belt sheets are cheaper than B&Q on screwfix. Would recommend screwfix also. Three orders placed and...

OK I did not make myself clear! The 2nd inlet is to increase (double) the rate of flow into the tank. Hence the 2nd overflow pipe is required also. would this work?

Not this one. Its the downpipe from the garage and the whole of the back of the house and it drains into the main drain (or as least lifting the nearest manhole cover and it drains into this). Which this is a spur off the big main drain.

Should I be concerned, as a kitchen bulb (when it blew) tripped the RCD lighting circult.

How do I know what the pressure of my mains is? I too have a power shower, having moved house into one that has it. But the shower drains the cold water tank. The shower blur states that it can use 22 litres a minute, and the plumber and my own measurements of the cold water tank reckon its a...

I have cold water supply from the cold tank in the house, in the garage already but do not have access to a drain. The only access I have to a "drain" would be run the outlet of the dishwasher into the downpipe of the guttering that comes off the flat roof of the garage. Can I do this or would...

5 level is what the insurance company are saying, currently the doors have only 3 level, but I've fitted 2 rack bolts to the rear door. Those locks are not BS3621, which again the insurance company want. But 5 level lock is what I'm looking at. I asume to change a 3 to a 5 level its just...

Ok I need to replace some locks on final exit doors. However I know I need sash locks to replace what I have, but looking at www.screwfix.com I'm confused? How do I know if I need 2 1/2 or 3 inch ? What do they mean by S/S or P/B lock ? Or NP and EB type lock ? Anybody- thanks

Did you end up buying this ? Cos I'm looking at the same one from them.

Which is better? A belt sander or a sheet sander? Apart from the cost, belts are about £45, and sheet about £15, and replacement belts seems to be cheaper, but a they have a greater area, I assume its swings and roundabouts. Also I’ve used a belt sander, and clearly the belt goes round in a...

Ok fitting a fire mable hearth, marble back plate and pine surround. BUT I have to drill through the marble back plate to get a gas pipe through. Marble is 20mm thick, and about 1 metre square. I need a hole 20mm in size about 60mm from one edge. Question what drill do I use - Masonryl? What...