Search results

I am trying to fit a new shaft to my old Lump Hammer. What can I use to pare it down a bit? Its too fat to fit in the hammer head. I don't have a Grinder, Sander or Power Saw though. Its this shaft from Amazon: Draper 31149 Hickory Hammer Shaft for Club,Blue,255 mm...

Its over 50 years old and i don't want the bottom giving way all together. I would just prefer it to fill them in and make it look nice before I paint it.

Its a brass or a brass alloy not copper. I am not good at soldering though.

I found a old metal Plant Pot in the shed. I sanded it down as I was going to paint it and use for plants. I have noticed though there are hairline cracks on three sides. What would be the best thing to use to fill and bound these cracks? I have attached pictures of the cracks. Thanks :)

I think I have fixed it lol. I will find out when I put stuff in it. My nephew got a old aluminium sign and put sealent on holes he drilled in it and the bin. He attached it to the bin with tec roof bolts.

There isn't it was grass falling out the bottom that made me notice lol. I also had look inside it with a torch. I have left it as its been winter but I need to get something done with before too long as the garden will need done shortly lol. The bin comes with drainage holes in the side.

Going to get a new light at some point lol.

As its now getting to the time I will need it for the garden I decided to go for the Pesrspex sheet. Does anyone know if B&Q will cut you a bit to size? Some other questions lol: Can I sand the bottom of bin with an electric hand sander? What is the best way to attach it to bottom of bin...

Thanks, that is what I thought. I have had no issues with water inside! as far as I know. I will look when I replace it. I have had it two and a bit years I think. Its on the back door step so gets all weathers. :)

I have a LAP brand Security light I think these are the ones sold by Screwfix. The LED Bulb is about to go. Does anyone know if I can get replacement bulbs or do I have to replace the whole unit? I don't see anything about bulbs in the instructions. The part numbers on the instructions is...

Yes it is, I thought of that but I am worried that they would charge me for a new one lol.

Would it matter that its not quite level due to the heat warping?

Its a sort of line not a regular hole though the picture makes it look much bigger due to the anount of filler I had to use. Where would I get Waterproof Perspex and the Glue thanks?

Can anyone suggest a filler to fix a hole in the bottom of a Garden Waste Wheelie BIn? Someone was burning old documents and put the ashes in it some where still hot though even after 24 hrs...

I forgot to say it stands on the floor. Its very tall to put on a desk.

I have a old a Anglepoise Lamp that I use as a reading light. The bulb went. As it is for reading I would need a bright one. It says on it 100w Max. Is it still possibe to get these or what would be the modern equivalent? Its bayonet fit bulb. I am in the U.K. it stands on the floor. Its very...

My Brother-in-law made me some brackets and fitted them. Problem solved its rock solid now!

Correct its brick lol. I got confused.

These are the Rhino Self Assembly Boltless ones they have no drill holes just slots for the metal tags on the shelves to go into. I got these as not all my books are a standard size and you can adjust the height of them. Yes, its concrete as its a Terraced House and and there is a chimney...

I bought some Rhino Shelves a while ago for my bedroom for books. They are all level and built correctly but the seem to wobble. It was suggested to to me to buy some brackets to anchor them to the wall to stop this. I would need to drill holes in the shelves and then the concrete wall. Its...