Search results

Sorry did not read that correctly lol.

Right the Vice is a Record No 0. The worktop is 25mm thick. The bolt hole in the vice is 5mm. Its on a old sideboard that I use as bench/storage thing. Not a big vice but fine for my use. It was my Dad's.

I will go and do this and post back lol.

The problem is there is a drawer right below it so I don't want huge long bolts. I measured it roughly by putting the bolt in the vice bolt hole then through the hole i drilled in the worktop.

Yes, thats what i found also. The problem is there is a drawer right below it so I don't want huge long bolts. I measured it roughly by putting the bolt in the vice bolt hole then through the hole i drilled in the worktop.

The head of the Bolt is about 10mm across. The thread across middle of bolt is about 7mm.

I only have 1 and no nuts. Without a vice or clamp it wont be easy lol.

I am looking for bolts to attach a Vice to a worktop in my shed. I found one that fits but I need it a bit shorter about 6mm in length and I don't have nuts. It says on the head M BUFO 88. Does anyone know if B&Q stock these or something that will do? Thanks

Is a Dremel worth buying? What sort of stuff can you use them for? Thanks

Is it Legal to Paint Outside Gas Box? the box outside that has your Gas Meter. I have seen people do it but was just wondering if anyone knows as mine is quite dirty. I own the house. Thanks :)

True enough with the cheap ones.

Take a note of the Number on the Battery. You can buy them in ones form a jeweller or watch repair place. You might also get them from pound shops but a packet of them.

I have been fixing slabs that were not level. Is there a tool I can buy for tamping them down better? I seem to remember one but forget whats its called LOL.

Yes, but do I have a choice? I have been told by some that I don't as they are saying its old and has to be replaced even though its working fine.

CMOS battery needs replacing would be my guess also.

Affinity Photo 2 is also good! Its not free though. You can get the iPad version on its own for £19.99. No Subscription I have the PC Version for £70 https://affinity.serif.com/en-gb/photo/#buy

No its a old Non Smart type at least 30 years old I think.

I have resisted getting a Smart Electricity Meter installed. Last week a man from Scottish Power came out to do a equipment check and said we must get a replacement meter as our non smart one is now old. It must be a least 30 year old by my guess. He asked me how I did my meter reading and I...

It could well be lol. The Bar Sink? the small sink next to the big one also needs fixed but that is for another day LOL.

That was my thought also. I would never get a sink with Mixer Taps again. For one thing they don't work with a garden hose or pressure washer. I have tried adapters but no luck. I will wait and see if its ok before getting new tap.