Search results

Hi, I have an internal soil air admittance valve in my bathroom up stairs and I am thinking of putting a toilet in the utility room will I need to put in another valve. Cheers

I am going to set the pump at 3 will let everyone know how I get on.

At the temp outside just now the rooms get hot but when it gets cold I need to top up the heating with a wood burner. The trvs are all working ok, the whole heating system works perfect with the only exception of the house not being as hot as it should when it gets very cold outside.

If I move the pump to three will it make any hotter heating was fitted with a company cavity wall insulation done and some of the rads are bigger than they should be.

I took size of rooms and gave then to plump centre they told me they were correct size for room.

Put new heating in last year always thought it was a bit cold, system is balanced and there is no air in rads, boiler temp is ok the rads get hot.

Hi all, Can anyone tell me what I should set my central heating pump at 1, 2, or 3. I have 10 radiators on ground floor and 4 first floor up, I have it set at 2 just now rads are hot but the house is not that hot I have correct rad size in all rooms.

Hi, The detail drawing is the correct one, the flashing was just to give it a neat edge into the gutter. When I picked up the cladding there was gutter there but it was huge that's why I was going for deep flow plastic but you would see the edge of the roof and would not look very good. Hope...

Hi, Just built a free shed 20 feet x 40 feet made from industrial cladding I am not a builder so I don't know the technical names for different parts of the shed. Sorry I don't have any pics as I have not put the cladding on yet, the roof will over hang the eaves into the plastic gutter but...

Hi all, I am looking for ideas how to finish my box profile roof so that it don't look like a DIY job gone wrong. The roof meets the wall where I am going to put plastic gutter, the roof is 100mm insulated box profile so can't put flashing along bottom to give a neat finish where going into...

Cheers will try that.

Hi, tried that but still not working, the make is a manrose if that is any help.

Hi all, my humidistat bathroom fan will not switch of automatically is it time for a new one or can it be repaired, it is only 2years old. Cheers

Hi all, I am going to replace my gutters as someone made a very poor job of the gutters that are on the house now, what is the space between each gutter bracket and how do I get the measurement so that they are all even along the facia board.

Cheers will have a look

I was thinking of putting hardcore down first but not sure what depth also to stop it cracking I was going to lay it in two slabs.

I am building a shed 12m x 6m with a concrete floor, do I need to take the muck out and replace with hardcore then pour my 6 inch of concrete or can I just pour the concrete on the level ground. Cheers

Phone me on I am only a few mile along the road.

I am getting quotes of more than that, can anyone recommend a good rough caster in the West Lothian area.

Hi, can anyone help by giving me a rough price to dry render a two bedroom detached cottage plus replace four air bricks no scaffold require and all old render has been removed. I know this is difficult to price without seeing the house, I am in central Scotland.