Search results

  1. H

    engineered oak flooring

    Hi all been busy preparing the floor for laying and wondered as all the planks are exactly the same length do you line the joints up as in brick walls, or do you stagger them all, asthetically which have you found to look the best
  2. H

    engineered wood flooring

    Hi all we are putting down engineered wood flooring in the hall, kitchen and dining room. and she has seen a programme about the batten method. any ideas what this is and the advantages. secondly carpet and underlay has a thermal insuation about it. what is the wood floor like, what is the...
  3. H

    garage insulation

    Hi all i want to put space blanket insulation in the garage under the flat felt roof supported by netting do i put it silver side down so you look up to see silver. daft question i know also our boiler in about 500mm below the intended level of insulation on a frost thermostat. will the...
  4. H

    under floorboard insulation

    Hi all The cold coming from under our floors is terrible. its a 1930 house with approx 1ft under the joists at the most and air bricks everwhere looking at r values etc it would seem insulation between joists on netting would be far better than good underlay it a shame about having to take up...
  5. H

    leaking flat roof

    Hi all we have a soil pipe running up through my flat garage roof that is felted. with heavy rain a small amount of rain runs down the outside of the soil pipe into the garage. i have been up, brushed on a thick layer of bitumen around the pipe and roof joint but it still comes in. other than...
  6. H

    wire up a ceramic hob

    Hi all there are three live connectors on my bosch ceramic hob connection 1.. nothing connection 2.. 2 front rings ( i found out a week later ) connection 3.. if i take out my hob and try this will all 4 rings work or do i require some type of bridging wire many thanks
  7. H

    wire up a ceramic hob

    Hi please help. i fitted an electric hob bosch all went well but the rings didnt work. there are 3 live connections so i move to the second connection and two rings worked if i move to the 3rd connection will they all work or do i need some type of bridging wire.. many thanks
  8. H

    lead work above a bay window

    Hi all i hope someone can help. we have just had some lead flashing above our bay window from 5lb lead. however the lead shows the beating,or working marks and im not sure if it is just rough or to be expected. there are no cracks or anything but ive never seen the lead before it weathers so it...
Back
Top