Search results

Ok, so floor been up today. House was built 2005. They have put 50mm Rockwool installation on top of plasterboard of room below, then plastic pipe clipped 15mm poly pipe to the sides of the joists at the top. Joists are at 400 centres, so two pipes are run very close, then 400 centres. There...

Ar$e

Lol Great thanks..! I'm pretty sure it's not this.

Hi all, I'm starting a bathroom refurb, the whole thing is being re-jigged, pipes moved etc. The whole house has wet underfloor heating, including the bathrooms, this will be the first time I have dealt with wet underfloor heating. Under the floor covering there is what looks like 8x4 sheets...

Scroll scroll scroll.. Jesus f Christ...

Changing oil hose yearly is recommended.

100mm cavity slab is normal.

I can cut worktops perfectly with a circular saw. Those pictures are awful..! You could cover chips in plinths with white silicone.

Always cut laminate work tops into the bullnose upside down, sharp fine blade = perfect cut. Plinths should of been cut at the top, but again if you use a circular saw, cut from the back.

Ops missed that..

Holly Jesus

We're does he say the garage circuit is protected with 13amps?

Thanks.

There is room to put after the pump? The water was clean..ish but the rads where black when drained. The damage has already been done to the boiler, if any, so I don't think that's a problem. The system was still working.

hi all, I need to install a magnetic filter on a old open vent system, ideal place is in the airing cupboard. Trouble is there is no return pipe in there. Could I tee it in after the vent, before the pump? Putting it in the flow won't make a difference as it's an old system anyway (fitting...

I've seen it on a police program on TV, camera couldn't make out number plate, owner got fined.

It looks like to me that each core is connected to separate terminals but aren't connected together.

Blar Blar blar... A extension lead isn't designed to take a continuous load of 13 amps. Simple.

I don't understand, you add water to the paint for a mist coat.. That's not gonna break the budget ! :roll: