Search results

Sorry the pic uploaded the wrong way round! Thanks for the reply, would expanding foam not be an option then?

Currently renovating our kitchen and have taken some 1980s polystyrene tiles off the ceiling. Most came off fine but in one corner there's a large(ish) hole (picture below) in the corner of the room where the ceiling and walls meet. It was packed with all kinds of rubbish, newspaper, old bits...

So I'm in the process of decorating my stairs and hallway, and one of the 'walls' I'm wanting to paint with dulux Matt emulsion is the wall that houses the under stairs cupboard. Now when I say 'wall' it actually appears to be paneled wood with about 50 years worth of white paint on top, the...

Ok so I've wired up the light as shown in the picture and as described above. Everything is working - the light itself and all the other upstairs lights. I've tested the fan cable I pushed into the loft with a volt pen - both with the isolator switch switched on and off whilst the light is...

Ok cool thanks mate, I'll try it in the morning when it's light. Just so i'm clear though..... 1. Connect the green/yellow to Earth on the light 2. Connect blue with brown sleeve to Live on the light 3. Connect the black to the Neutral on the light. Connect the remaining red and...

Any advice on the two remaining loop wires? The red and the brown ones? Do i put them both into one side of the light or one in and one out?

Ok so took the dog for a walk and popped into Wickes and bought a new spotlight bar that is suitable for bathrooms. This one also has 2 extra ports for looping wires. So...... Assuming the wires in the cable on the extreme left of the orignal picture are for the extractor fan, I'm only...

I've opened the fan isolation switch and it is wired up as can be seen in the picture. 2 cables coming in to the switch, both with 1 brown, 1 grey and 1 black wire and both seem to be sharing the green/yellow wire as there is a copper wire from each leading into the casing of the green/yellow.

Where does the separate terminal block go once the red and brown are connected to it?