Search results

Sorry for delay guys, my system is hsa6200. not heard a thing off Yale despite two emails

Cheers mate Just awaiting a response from Yale

Hi guys, I’ve searched for the answer so hopefully someone can point me in the right direction. I want a second siren for our Yale house alarm. I currently have the basic version (comes with a small grey keypad rather than a hub) can I add a siren to this kit ? If not can I buy a different...

Excuse the ms paint diagram, but this is the idea free image hosting 5.5 & 7.2 k

guys, Can anyone identify this part from our pyramid patio heater ? It sits on the control unit in the bottom of the tube image uploading Cheers

According to Both builders spoken to so far 2ft of footings Red facing brick up approx 4ft Block above (for rendering after) No return on cavity walls 1700 wide black composite door with glazed side panels 2 x concrete lintels @ 1800 Slate gable roof Insulated concrete floor

Hi guys, I am getting quotes for a new porch extension as detailed here: 4ftx8ft brick and block work. Slate gable roof connected to drainage. Black UPVC fascias. New insulated floor. Remove existing arch front door and fit lintel. New composite door with glazed panels either side No...

So I left pan in place with water in. Checked after a few hours and water is all around the base. No cistern attached, no flow through the soil pipe. So there it is, cracked pan. Online company are being funny about refund. Not my problem as helping a friend out, buying a new one tonight from...

Was the issue the pans ?

Sorry I didn’t get a photo but I will do, I’m away for few days but it’s just bothering me. I suppose if the pan leaks when full without cistern even attached then hairline crack on pan is the problem

As in through the flush hole ?

hi all Spent a bit of time installing a new toilet with new flex hose and new pan connector. All went well until I noticed that water was slowly leaking from under the pan. I looked all around the new pan connector which was dry as a bone, same for the flex hose. I removed and reinstalled...

I avoided the brush-in products after using some on my last patio. Yes very easy to work with and imo look fantastic when first done, range of colours too. But after one winter it started to crack and weeds somehow started to pop up. So decided to go sand and cement

Cheers all. I’ll let it weather and revisit this

Hi guys, So I went with the semi dry mix which I am happy with in terms of the strength of the pointing. I think it will withstand a jet wash unlike a dry mix. Anyway here’s a photo, there is some staining but I tried to keep it minimal. Are there any products which can take away the excess...

Cheers mate, On a 3-1 ? Will the semi damp mix still stain the slab, obviously I don’t intend on getting any on the slab but it’s going to happen !

Hi all, I have searched and found conflicting info on pointing my new patio. I’ve checked paving expert and again gives various options. Basically I have messed up as I’ve been doing it bit by bit and not pointing as I’ve been going. Anyway, will I be able to get a good strong pointing...

Hi all, I am looking at getting a porch extension built. I currently have a front door followed by another solid wood door after approx 1meter (this was originally the front door) Few questions. Under pd I can do 3sqm with max height of 3m. All good But can someone clarify whether or not...

Height to top of mantle is 950mm from the hearth. The bottom of the lintle where the register plate is installed is approx 940mm if that helps

I would ideally like multi fuel but will mostly be burning wood.