Search results

I shall be looking at replacing my thermostat for a new one, not sure exactly on the connections? Old model is a acl drayton, 4 wires connected, Red, Blue, Yellow and earth. New one is a sunvic tlx9201 also 4 wires, problem is the labeling is different! 1= Com, 2= Satisfied, 3=...

I shall be looking at replacing my thermostat for a new one, not sure exactly on the connections? Old model is a acl drayton, 4 wires connected, Brown, Blue, Yellow and earth. New one is a sunvic tlx9201 also 4 wires, problem is the labeling is different! 1= Com, 2= Satisfied, 3=...

Have just had some decking delivered, its the pressurised type? Some web sites say when laying them 'Put them together to allow for shrinkage' other web sites say to leave a gap between 2 & 5mm :? Many thanks in advance!

many thanks!

Hi Guys, I recently had an extension on the house, all the electrics were signed off. However, i put a provision for powering outside decking lights. The power is ready to go, could someone advise if i need to use Blue flex when running to a IP67 Junction box where i shall be putting the...

Please could somebody advise on the latest color coding abbrevations below are correct Black BK Brown BN Red RD Orange OG Yellow YE Green GN Blue BU Violet VT Grey GY White WH Pink PK Turquoise TQ

Thanks very much, will get on and order!

Could anybody advise on what size resistor should be used :?: I am wanting to use a sounder to be wire in with a 24v DC output. The sounder is a 12v DC with a current of 8mA

earth loop considerations?

I have a single phase motor with a start current of 25A and a run current of 6.5A, I am currently using 1.5mm Flex, is this the correct size flex? :?