Search results

Sorry about this question but I'm new to plumbing. Is it best to use the push fit pipework or is it best to use the stuff you glue. also would I be able to get hold of the access eye you talk of at somewhere like B&Q. Thanks for all you help Mark

Thanks for that

Sorry its taken so long to reply. Here is the diagrams. Current Plumbing: My Plan: Will my plan work ok and how much drop will I need on the drain. Thanks very much Mark

It bends slightly to the right then goes under the left joist. The flash just didn't reach that far. I'll draw a little diagram in a bit Thanks Mark

The picture doesn't show it very well but the pipe goes under the left joist not the one on the right as I labelled. The hatch is back down at the moment so I can't check the joists. I think the uppers are either 6" or 7" and the sink is probably about 1.5 m maybe 2m past the upper joist...

Hi All. I've just moved into my new house and have been having problems with the kitchen sink drain in the kitchen which is part of an extension that was added. The sink was not draining properly, so I used a drain cleaner to see if that sorted out the problem. It didn't and the drain...

Thanks Dave- going to look into that.

Nobody got any ideas? Thanks Mark

Ok, we'll start with the shower. its an Aqualisa pump, not actually sure of the model at the moment. I have a Powerforce mixer and have just replaced the hose and head with a screwfix one. The CH system is a sealed system with 5 rads downstairs, 1 with a trv and 4 upstairs, again 1 with a...

It's now no longer just about my shower though.

Hi, I've been having problems with air getting in from somewhere. I have a sealed central heating system running off of a potterton boiler and I have a twin impellor pump running off of the hot water tank with some sort of dual flange(see my previous post). Is there any normal places for...

Thanks for the replies. Chris: I had a look in the flange and it seems to be, the top feed is goes straight into the tank. I did wonder about the pipe from the flange, it is angled down. Would this let there air get trapped at the flange? I have the tank thermostat set to 60, the pump get a...

Hi , I'm not sure if anybody can help me with this. Last night I drained the Hot Water, checked the flange for blockage, then I re-filled the tank the shower was then fine. This morning, you can hear air in the Hot Water system and the shower is back as it was with no pressure in the hot water...

Hi, I am having great problems with the hot water pressure for my power shower. If I just turn it on at anytime the I have to turn the mixer up most of the way to hot and then the hot water just comes dribbling out. The shoer and other items were fitted by a plumber who has not done a very...

I also wanted to get rid of the coving adhesive as well

Hi, Is there a way to remove coving and plaster ceiling without damaging the ceiling artex as the people that used to own the house have coved around the built in wardrobes, thus I now have coving in the middle of the ceiling? Thanks in Advance Mark