Search results

  1. G

    baxi 105e pump prob

    cheers for the replies it helped in my fault finding, i checked voltages to pump all ok, ended up narrowing it down to the micro switch on the diverter valve, it seemed to be stuck in position, managed to get it free and cleaned some limescale from around the top and now the boiler is back up...
  2. G

    baxi 105e pump prob

    cheers for the info, can you manually activate the microswith and how would i go about testing the pump
  3. G

    baxi 105e pump prob

    neon indicating fault on pump or low pressure, the pressure was on the low side so i have topped it up to 1.5-2 bar still get the fault. i have opened the air valve on the pump which did nothing, any advice much appreciated or am i looking at a new pump.
  4. G

    emergency light?

    cheers for the replies. ill have to see if i can find any other fittings maybe square or rectangular
  5. G

    emergency light?

    its for a few emergency lights in a pub, got to be surface mounted fittings what the landlord wants and there are joists that are 270mm apart running through the pub. So the lights need to fit in between them. think the 2D option is going to be best, how much room do the conversion kits take up...
  6. G

    emergency light?

    is there any coversion kits that will convert an ES GLS lamp?
  7. G

    emergency light?

    Anyone know where i can find a maintained emergency light (round) that is less that 260mm in diameter. similar to these http://www.thelightingsuperstore.co.uk/product.asp?productid=35705
  8. G

    metal shed

    so should it have a separate 10mm2 earth to the shed, would having the shed on a TT system cause problems?
  9. G

    metal shed

    house is on a tn-s system, what is the best way to go, regarding earthing arrangmetns for the shed, can the shed be earthed through the armoured cable supplying power to the shed via the consumer unit in the house or does it have to be locally earthed using a rod. shed is 10m from house
  10. G

    IT radial circuit

    cheers thanks for the info
  11. G

    IT radial circuit

    yeah just 1 No radial
  12. G

    IT radial circuit

    can anyone tell me with regards to a radial circuit which will have IT equipment on it, what do you do with the last socket regarding the cpc, obviously on a ring all sockets will have 2 separate cpc's to terminate in separate earting terminals, but what about the last socket on a radial. Is it...
View older results
Back
Top