Search results

No wonder they are importing the Polish to carry out electrical checks in the UK LOL. This board is full of dodgy electricians who cant even fit a plug

Can someone please tell me where i can find the gas reg that quotes when installing a new gas carcass within a property you must fit an isolation tap to the gas fire if none was fitted before. Thanks in advance

What is the best method excepted by CORGI to join Soft copper gas pipework together, avoiding all hot works. Best way: Crimping? Compression fitting? If anyone has any information or web sites giving the best fittings or crimping tools to use i would be grateful. Many thanks

Can someone help me to find a building regulation regarding running water in a bathroom. The story being a combi boiler has been fitted in a property with out checking the water flow rates to the property. When the washing machine is on or the downstairs tap is turned on there is no water...

Can someone help me to find a building regulation regarding running water in a bathroom. The story being a combi boiler has been fitted in a property with out checking the water flow rates to the property. When the washing machine is on or the downstairs tap is turned on there is no water...

I have a long running problem with my fiat punto diesel van missing at around 40mph in top gear. It sort of shudders as I drive around at that speed but when I change down to 4th gear it is ok. I took it back into the fiat garage 2 years ago with the same problem and they said it was caused by...

thanks for that it does clear something up thanks again :lol:

What is the difference between a sealed and pressurised system and why would you fit metal blank end to the rad replac a bleed nipple on a sealed system?

I have the above boiler fitted and was wondering if anyone could help me work out what the problem is with it as it will not fire up. The green light on the on switch flashes slowly but when calling for heat and hot water no other lights on the on switch light up and the boiler will not fire...

Can any one help me out as i am looking for an RFI sample to help with some course work. I have looked all over the net but am unable to locate a sample. eg: a request from information from a structural engineer or designer asking what design of partition walls are needed, size sound proofing...

Morning all just thought i would post some maths home work for you all to work out as i dont have a clue on how to do it. Bit complicated and not sure if this can be calculated but here goes? If a property is supplied with 3 bar cold mains water pressure what flow rate would that give you...

Thanks for that, So what your saying is that i only have to measure the down stairs hall to get the rad size i need and this will be enough to heat the stair well and the landing? Their is not enough room to fit a rad at the top of the stairs so do i calculate the hall stairs and landing...

Does any wise owl know the correct method i should use when measuring a radiator to fit in a hall. I have a hallway stairs and landing and obviuosly want a rad that will heat all the above. What measurements should i be taking to work out the btu of the rad needed as i have been told...

Help! Does any wise owl know what year building regs said that cavity wall insulation should be installed into new buildings are new cavity wall extensions :? I have looked and asked every where and no one seems to know the date? Thanks in advance :)

Oop ok sorry, The heating being district is a gas boiler and stored in an outside garaged sized building which feed a block of flats. The system has to valves to govern the heat to the rads and hot water but as we all know can be faulty giving scalding rads or in some cases hot water however...

My boiler makes a banging noise maybe we could get together and form a band? :wink:

Hi all, Problem: If a block of flats was fitted with district heating, elson tanks, and a plastic over flow pipes if and when the water over heated would it blow off in all flats or just one and would the temperature from the district heating be sufficient to melt the rubber washer in the...

Its not a poor reflection on who passed me just different people have different ideas on what should or should not be entered onto the bench mark and since you don't fully explain what should be entered i also put you into that category. I notice you don't mention using a flow cup to...

When filling out the benchmark for newly installed system boilers does every box need to be filled out. Someone mentioned that the paragraph where it is asking for water temperatures at the taps cold and hot using a flow cup only needs be completed if a combi boiler is being fitted. If a...

Could any wise owls amongst you please help me in locating an outlet that can supply certain parts a glow worm economy plus 50b boiler. The boiler is a glow worm economy plus 50b GC no: 41-319-03 and am looking to find the pilot injector and the small pilot gas pipe from the gas valve and...