Search results

This is the lock.

Hi I want to change. a door lock on a newish composite door but after taking the handle off the lock looks to be in a metal shroud which has some sort of security screw on the front , my others didn't have this and the lock came out ok. how do I get the lock out of the door do I need to unscrew...

do I need to make it a v shape first or just fill with flexible filler thanks

Hi All I had the ceilings skimmed last year to cover artex and since then we have a crack 1 inch away from the architrave about 3 feet long prob caused by waking in the loft, what the best way to fix please.

I had a simular problem for years where the boiler would lose pressure over night and spent hundreds swapping things to try to fix it eventually we found it when the kitchen was been renewed and a wall taken down we had the ceiling down and I found a connection dripping and just needed nipping...

Well electrician has been and wired up the Hive using the wiring centre and there was 230v going to the Honeywell CM907 , I dont know why but at least it ok now.

First experience of BG and not a good one tbh.

Thanks , I will get an electrician I know in to sort it out. The BG guy deffo said its a live and neutral not live and live switched and thats why he couldn't fit it. First experience and not a good one tbh.

Fat finger syndrome its a CM907 controlling the heating in the kitchen, the LP522 controls the hot water only fitted in the airing cupboard. The LP522 was fitted by our boiler people when the old one failed I think he didn't have a single one on his van so fitted the LP522 it was the BG guy...

Thanks Chris

Think were at crossed purposes , the BG guy said the Honeywell in the kitchen which did the heating had a live and neutral not a live and switched live to link out. LP522 is in the airing cupboard , will it need new wires running

Sorry , will the Honeywell live and neutral wire go back to the boiler to be able to joint the wiring

I bought a dual channel, only one zone. I'm going on what then BG engineer told me when they cancelled the install. Will the Honeywell go back to the boiler to connect together

Hi All I took advantage of the Hive Black Friday offer and bought a Hive active heating with installation. BG came to fit but couldn't fit it as I have a Honeywell CM0970 controlling heating ( cable live and neutral only) and a Drayton LP522 controlling water he said I need multizone but I...

I have an issue with piece of plaster popping its under a plaster nail that hods the plaster board to the ceiling and pops about the size of a 50p piece I have put polyfilla in but as its in the hall way it keeps coming out , what can I do to fix it

Hi All Does anybody know if I can use a Philips hub ( all ready installed for lights ) to connect to a Hive thermostat so I dont have to buy another hub Thanks

Took the trim off another window on the ground floor thats the same as the other one with trim coming off and there's a 1 inch gap between window frame and brick all the way around, surely they should have put expanded foam in it when they installed it. photo attached so far I have put foam...

if there's a gap but I can't get foam in , do I just silicone the edges then put the trim back

HI crank39 Glass and frame was was condensation as heating was on and it was clod outside, I went to suck it up with Kaercher window but it was dead so I just wiped with cloth hence a bit of water left. So basically I need to take the trim off and if any voids put foam in the re-apply the trim...

Hi All My interior wall where the double glazing is attached has started getting damp , i was wondering if the damp is getting in between the wall and the double glazing as there is a small gap on the front of the double glazing , I have attached pictures of interior and exterior