Search results

Other option would be get it made to order but I understand it would be much more expensive ?

Looking to get a shed/garden storage but all I can find are too deep and will take too much space, so I had an idea to buy what is available and reduce depth from 78cm to 60cm by cutting necessary parts ( I need 2 feet deep max). Here is the shed I am considering to get...

Thank you very much guys, I connected VR10 to correct pair and system works the way it should now, problem solved! (y)

Thanks Baz, will try that

Sorry silly question, vr10 has brown and white wires, connection plug orange and black, so which one connects to which one?

Thank you very much The 831 Bunny!

It's thin grey wire coming from the top left corner, connected to the brown terminal in the top left on the board which is next to blue white and pink terminals...

Thank you Baz, I will check connection to the PCB and as you suggested possible next step factory re-set and setting it up again.

Hi Guys, thanks for your input and my apologies for not being clear in the original post. I seem to have learned a bit more about this system since then. below is updated specs: - Vaillant ecotech 624 system boiler v.6.08 - Unistor cylinder 210L - VR 61/4 Control centre v.4.18 - VRC 470 weather...

thanks Jeff, I've reduced DHW temperature but it didn't help. Still shows DHW demand on live monitor but boiler is not firing, just motor valve open and sound like pump is running... One thing which I considered not important and didn't mention before but after your post mentioning cylinder not...

cylinder temp not showing

just to add I was in a similar situation asking on this forum about 2 years back - combi or system for 5 bedroom house Thanks to advice from the guys here got system - 210l unvented cylinder with 24kW boiler which serves 2 showers, 7 rads and 3 zones underfloor heating

this is what you need: this to check pressure and this to measure flow. The first one you can screw on standard garden water tap. System with an unvented cylinder is a way to go but have to make sure flow is good enough. hope this helps

Have put in new turf in the garden two month back and now can see loads of moth flying above, which I assume is Sod web-worm. There were there before however I completely removed all turf, levelled garden and rotovated the whole area I suppose these are new. There is no damage seen yet and...

Here is an update: - There is VR40 next to PCB in the boiler and Circulation pump connected via VR40, aux.relay 1 (D27) - Vaillant confirmed that System diagram 3 is correct diagram for this set-up - When diagram 3 is selected, there are no issued with DHW but motor valve to cylinder stays open...

Thanks again everyone for advice, this is how it looks now Untitled[/url] by zypvv, on Flickr[/IMG] Untitled[/url][/IMG] Untitled by zypvv, on Flickr'][/URL]

Thank you for the input. Asked the guys to use wet concrete for posts on my side of the garden, and checked yesterday they have done it, so all good now. Good that I spotted it though...

it started to drizzle couple times during the day but don't think ground was wet Will speak to them tomorrow but thought I better ask people here first as maybe it is common practice these days.

My neighbour hired contractor to do fence and we share costs for my side. Yesterday noticed that on one side where they put up concrete posts already they using mix of cement and sand with ballast without water - dry cocnrete. I was under impression it should be poured concrete instead as this...

thanks, I can do in two hits now but the other one is more for the time when I am on holiday so that it can run on timer