Search results

Hi yes the property is secure with out the door, I essentially want to conceal the doorway from the outside. Put insulation in between the gap and then make the door way flush with the kitchen wall and extended the work top. I've been trying to remove the frame but I'm struggling Thank you

Hi, I recently purchased a house. The previous owner had created a utility space in what would have been a wood frame and corrugated roof car port. It's now essentially a bolted on wooden extension. The brick work of the outer wall is exposed. My wife wants to use the space for work, and would...

Why 3 outputs. You need a "set" an output and and an "intruder" output. Check your output programming and ensure they are going to the relevant inputs on the dialler

Its nots something you can resolve yourself unless your willing to default and reprogram the system from scratch. The other option is to contact a local installer that service and maintain galaxy system. Which model is it?

If you seriously don't want the system, just kill the mains power then remove the equipment. You'll probably want some extension ladders as the external sounder will activate, The 700l is a entry level panel which is fairly easy to operate. As suggested just replace the battery in the main panel.

This suggests that engineer/ remote reset is enabled. To clear it, requires an engineer to reset the system in person or you quote the number to the alarm recieving centre and the supply you with a reset code. Obviously ADT won't help unless you take out a maintenance contract. Are the not...

Just wondered why you only want the LEDs to be active in walk test as suggested in the manuals?

Is that a restart via the menu or a power down. To exit engineering type in the pin code then the escape key

Reset? That was the factory default procedure, which probably wasn't necessary.

It could be anything. Upload a picture of the keypad.

Total power supply capacity: 1.0A (of which 200mA is used for battery recharge and 800mA is available for powering the system). From the manual.

With regards to the current you've got 800mA to play with. If your sounders are drawing 500mA in alarm just make sure the rest of the devices don't exceed 300mA. I'm sure a couple of PIRs and a keypad won't

Why do you need the model if your upgrading it? Or are you adding to the system?

The problem is honeywell G2 and G3 range don't come with installation manuals.

It's a tricky one. Fitting large commercial camera on a domestic property would act as deterrent, the down side they ruin the look of the property. I installed a working system on my uncles home and that didn't stop thieves. He's had ladders stolen off his van and a bike stolen from his garden...

Why do you need a manual. What's the issue?

Try egaweld

Has you checked the status of the circuit in menu 21? How is the circuit wired, using eol resistors of seperate tamper and alarm loops?