Search results

  1. R

    Stacking washing machine & dryer in Howdens kitchen cupb

    Damn. That will ruin the look somewhat. I had intended that the washer would be sat on the floor in the cupboard I'm not sure how stackable integrated washing machine and dryer would look or work.
  2. R

    Stacking washing machine & dryer in Howdens kitchen cupb

    Is there anything that can be done to make it fit? Or other options to look at from Howdens? Or - would it be best to get a Integrated Washer/dryer? But i would not know how to build that in to a cupbaord that was full height.
  3. R

    Stacking washing machine & dryer in Howdens kitchen cupb

    Hi, I had planned to have a Howdens "larder" kitchen cupboard and put the washing machine and tumble dryer in it, stacked one on top of the other. The more I think about it, I don't know how it would work. The cupboard is 600 wide and 575 deep. A washing machine is just as wide and...
  4. R

    What alarm wired/wireless with phone notification and cats!

    bernardgreen - Thanks fo the advice. How much should i expect to pay for running wires and fitting the whole system to a house of that size? Thanks re the home insurance, yes definitely something to consider. Thanks.
  5. R

    What alarm wired/wireless with phone notification and cats!

    We actually want the Burglar Alarm system. But thanks for the idea.
  6. R

    What alarm wired/wireless with phone notification and cats!

    Hi Guys, We are in the process of renovating a house and build costs are getting a bit much. We ar hoping to find a cost effective solution to the burglar alarm. The house is mid-terrace. The front has a ground floor bay, 1st floor bay and then a velux on the roof. The rear has bi-fold...
  7. R

    Unvented or Vented Cylinder - Which do i go for?

    Thanks very much. I did not realise that Vented required a higher pressure/flow than Unvented
  8. R

    Unvented or Vented Cylinder - Which do i go for?

    Hi, I am after some of your worldy advice. I had asked a similar question re combi or cylinder, and have decided on cylinder but I am now seeking a bit more knowledge on venter or unvented and any other types that exist. Firstly, I am not installing anything, I will be getting...
  9. R

    House renovation - Hot Water System - combi/vented/unvented?

    Thanks all for the advice - really appreciate it.
  10. R

    House renovation - Hot Water System - combi/vented/unvented?

    Hi, I've done a search, and I've also hunted around the net and spoken to a few heating engineers. Very few people seem to be able to provide a balance pros and cons to the various methods of heating/hot water systems that are available. I am planning a house renovation will require a...
  11. R

    Do I need an architect or just a builder? (loft, extension)

    Thanks all for the comments The reason for the pre-fab is ease and cost, I was not sure if I could get the same extension for the same price.
  12. R

    Do I need an architect or just a builder? (loft, extension)

    Hi, All going well i will be the owner of a 3 bed terraced Victorian house, in desperate need of a refurb. The works that need doing are: - loft conversion (with a full width rear dormer) bedroom + ensuite - rear extension (4m wide x 3m deep) - knocking down at least one load-bearing...
  13. R

    How to check if a house needs re-wiring and approximate cost

    Thanks very much. I'm in North London so probably on the higher of the cost-scale. The house is a terraced 3 bedroom (two floors) house of a reasonably decent size. The conditional report i imagine would go to some length to tell me that the electrics aren't dangerous?
  14. R

    How to check if a house needs re-wiring and approximate cost

    Hi, I am looking at purchasing a house that is in need of renovation. How will I be able to tell if the house needs re-wiring (other than the obvious things not working). Our intention is to re-do the entire kitchen at some point in the future which we would probably want to co-incide...
  15. R

    Vokera Excell 80SP - low pressure? No hot water / CH

    Just in case anyone wanted to know... Blocked venturi - and the blue angled tap ahd actually won, so need to be taken off and turned by pliers.
  16. R

    Vokera Excell 80SP - low pressure? No hot water / CH

    By that do you mean the blue angled tap - or the vale with the screw or both? - I've tried but failed with those, as said above....
  17. R

    Vokera Excell 80SP - low pressure? No hot water / CH

    Hi danny. No idea, maybe because it was installed 20years ago? Could anyone please tell me how to top up the pressure? Many thanks R
  18. R

    Vokera Excell 80SP - low pressure? No hot water / CH

    Thanks Tony. How can i top up the boiler - to up the pressure to 1bar? Thanks R
  19. R

    Vokera Excell 80SP - low pressure? No hot water / CH

    Hi there, I'm back ... after a year of no troubles, following last year's mess, the Vokera has decided to play-up again almost a year to the day! There is no hot water or CH. This is a problem that largely largely just started happening, rather than a gradual build-up. Last year, the...
  20. R

    How can I make new "white" pine look like light oa

    I was talking more of colour than grain. I just want to try and match the tones. I thought that would be fairly obvious. I'm looking to avoid products that when put on turn the wood orange. Also, seeing as light oak is a popular colour with bedroom furniture, and pine is prevalent, I was...
Back
Top