Search results

I have 24o volts at switched live on the terminal strip, but when do i test for 240volt at the 6 pin coonector

Thanks for your reply, the boiler is a 50 with the upgraded 5111603 board not a 50L so has no flow switch. The sequence of lights i get is perfectly normal when the boiler is going through its sequence however after the boiler water temp has reached its set point on the boiler stat, it switches...

so even the 5111603 boards can go wrong then?

Can you suggest anything I can try before I shell out for another 5111603 PCB, as i said I have 240v at the switched live but just get an orange flashing light??

Many thanks for your reply i will try to be more precise. It would appear that mine is a vent pipe then as it does not have any other waste feeds going into it, it just runs up the outer wall and dissapears into the ground roughly inline with where the toilet watse would go out through the...

Greetings to you all. I currently have a bathroom at the back of by bungalow which I cannot move due to the layout of the place, running up the rear exterior wall is the vent pipe for the toilet but I am building an extension on the rear and this will mean removing the outer skin of the rear...

Well the boiler has limped through Christmas cutting in and out with a mind of its own but at least its still working, I have done a bit more investigation and I now can confirm that when there is a call for the boiler to fire up, eg hot water or room stat calling for heat, there is 240volts at...

thanks guys this is all usefull stuff

Totally agree mate mine is working but its not right im sure

I know that permitted development rights do apply in my area, just not sure what the limits are, can i build out 3 mters or 4 meters?

Ok Heres an update is this normal: Room stat turned down low so not calling for heat. Boiler temp control is turned to about 75% but boiler light is flashing orange and does nothing.( Orange flashing light means external call for heat but temp control is set to off) I think? turn room...

Ok, so as usual the government has made it as clear as mud with this one. I have a detatched bungalow that is 78m2 which includes an extension that comes out the back 3meters and half way along the width of the bungalow. I have applied for planning permission to increase this to 4 meters and...

Whilst im waiting patiently for it to go wrong again, may I ask another question regarding the overheat stat and temp stats that are screwed into the pipework, are these screwed into a sealed pocket or will they require the system to be drained down to change. I did read somewhere that these...

Totally understand that certain parts are for gas safe people only to work on, I will note down the sequence next time it fails, for the moment im actually warm as its working, thanks for the quick reply 8)

Hi Huys Hope somebody can help me out here, firstly I know there are major issues with this boiler and i have searched to death to find a solution but to no avail. I have the above boiler which has PCB problems, but my boiler has already been replaced with the latest Siemens 5111603 enclosed...

I got ya now, many thanks guys, im sure il be back for more questions but until then you have all been a great help 8)

could you please explain what you mean, im using the segmented ridges :?: I see your in the new forest, anywhere near Ashurst by any chance :D

I have just completed the felt and battoning on my garage roof and have ordered all my tiles etc to start tiling, ive done a few small roofs before but never one with a hip running down each corner. The tiles im using are the redland plain type about 10.5 inches by 6.5 inches. Ive just layed...