Search results

  1. B

    Out building project/ Lining the walls

    Thanks noseall I will do just that with the walls . the roof however I have already had bitchumined and dressed with white grave , I dont really want to get onto it to much so will insulate from inside .
  2. B

    Out building project/ Lining the walls

    Noseall thanks for that: more questions sorry; do I stick the plastic sheet to the wall . for the timber frame do I plug and screw or use adesive ? I forgot to mention I have a 4 inch concrete roof will this work on there as well ? Do I need any thing on the ceiling ??? How far apart...
  3. B

    Out building project/ Lining the walls

    HI advice please for my out building renovation project ( sounds grand ) the walls are 4 inch brick so the building is cold with a tendency for damp on the one side , what would you recommend that I get the walls lined with , and can it be plastered afterward (plasterer required)
  4. B

    Using conectors or not

    thanks guys just for interest (I assume you might be ) the oven is a Bosch Classixx HBA13B250B 220-240v 50/60 Hz HONO 2200W Max = 9.16 amp??. (I think that's right if I remember Ohs Law) . existing cooker is on a socket below a cooker control 20 amp circuit . so stuck a plug on the...
  5. B

    Using conectors or not

    Thanks ban-all-sheds I have just had a look , No washers at all just the three connection screws .the earth has got a copper screw and a spade connector . considering this is a BOSH appliance it's connection is pants . yes I have crimp tool wit the necessary connections , I'll take your...
  6. B

    Using conectors or not

    Hi Guys . I need to attach a cable to a new oven . the question am i better using crimped ring or spade terminal or just wrapping the wire around the screw .
  7. B

    water pump

    Have a look at the rage . i have keept koi for years and the pumps are reliable and most importantly economical to run : http://www.oase-livingwater.com/wg/int/products/pumps/fountains/aquarius.html
  8. B

    use of exsisting 30amp supply

    AHH . I put it into Wiki Sorry guys
  9. Untitled

    Untitled

  10. Untitled

    Untitled

  11. Untitled

    Untitled

  12. B

    romoval of wall under a 4inc inck concreat roof

    sorry forgot the pics
  13. B

    romoval of wall under a 4inc inck concreat roof

    I have uploaded a couple of photographs of said roof if this helps form an opinion . if any one wants to price the job let me know I'm in Dudley west midlands .
  14. The out buildings

    The out buildings

    information on the renavation of the out buildings
  15. B

    use of exsisting 30amp supply

    Sorry What forum should I have used if not UK electrical ???? Got me :?:
  16. B

    Honeywell CMT921 24 hour wireless Programmable Thermostat

    Siemens REV24RF 7 Day Wireless Room Thermostat I like the look of the Siemens , is this as easy to connect up ? it's replacing a Lifestyle LP1011 timer .
  17. B

    Honeywell CMT921 24 hour wireless Programmable Thermostat

    Thanks Glasgowgas . LOl it just a brick wall . how difficult are they to wire up ??
  18. B

    use of exsisting 30amp supply

    HI I had my shower removed and pulled the 30amp cable back to the distribution board . On the other side of the wall I have out buildings , can I use the supply to fit a garage type distribution board to supply a couple of 13 amp sockets .
  19. B

    Honeywell CMT921 24 hour wireless Programmable Thermostat

    HI advice please . I have a combi boiler that is on TRV's with a timer . I was looking at the above with a mind to use the existing wiring for the RF receiver and put the remote part in the Lounge . there is a wall between will this work OK ?
  20. B

    romoval of wall under a 4inc inck concreat roof

    LOL I had a feeling that may be the case . I spent a few £££ having the roof re bituminized and graveled with a nice mineral edging . and would hate for it to crack . I am still at a loss why it's 4 inches of concreate uness it was for a bomb shelter.
Back
Top