Search results

Sorry if this has been asked before..... 1 I take the point about not tiling behind a bath, should I leave a gap between the bottom row of the tiles and the bath to fill with silicone? 2 My bathroom is wood panneled, (nothing behind it except brick), which someone has tried to skim with...

Normal copression fitting with olives and copper inserts. The JG website says to use their own plastic inserts, the ones without o rings for compression fittings.

Have I made a cock up? I have used copper inserts with speedfit piping and compression fittings, these are not the plastic ones recommended on the JG website. Am I in for trouble with leaks?

cheers mate

Fifty quid would be nice, the garage told me 200!!!!

Sorry to ask but what size are the machine screws used in electrical sockets? Can you get longer 40-50mm ones?

I have a similar problem with my 1.6. Took it to Ford they told me it was the IAC, they changed but it did not fix the problem. Went back and they changed the fuel metering valve. Still didn't fix it!!! Now they reckon that the whole ECU needs replaced, think I will learn to live with it. It...

Thanks for the info. Any thought on how I deal with the electric shower I am removing?

I am in the process of removing an electric shower, I dont want to remove the wiring as someone has gone to a lot of trouble putting it in. How should I leave the wiring behing the wall? Second question about earthing. I have had the lead supply pipe replaced. There is still some earthing...

I am planning to move a radiator from one wall to another (swmbo's idea). All the pipe work under the floor is 10mm copper. It is a two pipe system and the pipe runs will be shorter when I am finnished as the feed under the floor will be closer to where it comes through into the underfloor...

Just had another thought. The display sometimes comes up with the message "syphon loop filling"....any connection to pressure loss?

I have just found this forum. It is very infomative and useful. Thanks for the help. Sorry but I found the whole Jaun Kerr thread funny. Maybe Jaun should post some pictures of his previous work.

I can check this with a hydrogen detector I have at work. The system is only 4 years old. Would topping up the Dearbon help?

Thanks for the help. I am under a maintenance contract with British gas, just don't like the idea of them ripping up all my floors!!! Guess I am going to have to get them out and face the mess.

Gauge rises when the water heats up. Also seem to have to bleed a couple of upstairs rad every so often. Leak in the circulation system I have not spotted?

The complete system was new about 4 years ago. I have checked under the floors (as best as I could downstairs) and round the rads themselves. It has been losing pressure for about 6 months and no wet patches on the ceilings from the upstairs pipework. How much water would I expect to see at the...

My worcester greenstar HE combi seems to lose pressure after a few days of running. Having read some of the other posts I am not sure if the pressure relief valve is passing. Not a lot of evidence of leaks at the outlet. Any ideas?