Search results

re point with geofix its not cheap but does the job

I have a glass framless shower cubicle 1200x800 hinge door perfect for us with room to soap up. This

that age of house is properly lathe and plaster ceiling (strips of wood covered in plaster) chipboard screws will hold in this type of plastering. if it is chipboard i would remove it as it is a fire hazard. it will keep on sagging and pulling out the screw/nails you will have to get it...

Why are you all so sarky about someone fixing there own boiler?. losing money are you! we are not all able to aford £70+ per hour for a plumber to pee in our sinks and talk to use like we are 5 year olds. Plumbers are like dentists, you see them for 15 minutes pay a fortune and have to do...

the foundations are not just for weight but for movement. you will still need the 1 metre foundation.

do you want to remove the whole wall or cut a hole for the 4.5ft set of french doors?. if it is to cut a hole for the 4.5ft set of french doors then yes you could do the job yourself with some friends. you will need a rsj

plasterboard is fixed via galvanised nails (clout) or plasterboard screws. plasterboard should be fixed straight to the joists. double layer of plasterboard?. the boarding you are seeing could be asbestos that has been plasterboarded over. or boarding could have been used to try to...

i had the same problem and it was the brushes on the motor going. causing a jerk on spin startup as the problem you have.

A cheap soildering kit will do(less then a tenner) i have done this myself on my old pcb and it went on for another year before playing up again. just be tight with the solder. you have nothing to lose.

how do i change a shower light bulb?. it seams stuck on.

thanks i will give him a couple of weeks to return or go ahead with corgi. The plumber was going to come around and check the gas pressure but did not need to as it is working perfecly now. Thanks for all your help. :D

no way! the builder installed it with the refurb and it was comissioned and checked by his friend who is corgi registered and i have paperwork that he has filled in and also the bosch installation card is filled in. the fault was found after the plumber left the site. i am waiting for him...

it is a standard horizontal flue which was not cut. i think it is 900mm?.

sorry. on may the 25th 2006.

the code is flame not detected. pressure seams ok. would it be that the bath has a faster flow?.

does anyone know of a guide cost to changing freezer door on LG ELCTRNC GRP207QUJ that has been dented?. who should i get to do it?. thanks ======================================== please note forum rule 9

I have just had a house refurb with all new pipework etc. the boiler fitted is a Worchester Bosch Greenstar 35cdi combi/condensing boiler. it runs 3 wet underfloor heating, 2 rads, a shower, a bath and 3 sinks. all is well except for the bath which makes the boiler lock out with code EA. this...

I can send you any part you require for cheap from my boiler or you can have the whole thing for free if you can collect it. this is not a con. it is just to good to throw away. although i will have to soon as the builder finishes this week.

A house refurb. bigger combi/condensing boiler fitted due to extension.

i would suspect a faulty 2/3 port diverter valve rather then the boiler but im no expert. if your boiler is faulty you can have mine that is fully working and free if you can collect. it includes all the fittings, 3 port valve flue etc.