Search results

Just moved into a new house, it had doubled glazed with wood frame windows. I dont have any keys, can these be bought from diy stores etc. Its a Barrat home about 10 years old if that helps

Thanks Big All very helpful indeed :wink:

well when i put a peice of laminate over the area it covers the gap. Both in length and width. Its about an inch and a half smaller than the width of a laminate board. the length is about 4 inches shorter than a laminate board but the gap is directly infront of the hearth.

tell you what mate, you fancy a drive up2 Yorkshire :D Ill give that ago mate.

thanks for your help mate. I think i may take the frame option, just make a frame that goes around all 3 edges of the hearth like you said. Any ideas on what type of wood to use for the frame/border. Obviously not too thick. It has to be relatively thin Thanks

Hi guys, just has an old tiled fireplace replaced, with a modern one which has a smaller hearth. As a result i now have a piece just in front of the fireplace that has no laminate. how can i get around this, the nearby pieces of laminate also have chips on them where they used to meet the...

thanks

whats a soffit vent, sorry im not very technical. in the loft its simply an apex roof, with brick walls going up.

im in the process of installing an extractor fan in the ceiling of my bathroom, folks have already helped re wiring (thanks). Ive taken the ducting up and cannot find any ventilated area in the loft. Just wondering can i get anything that i can run the ducting to and leave it there, i.e. some...

what kind of pull cord switch do i need. just a basic one way? Thanks in advance

thanks for all your help.

ensure that i connect the earth up properly? P.s. does it matter which wires i connect upto the 2 brown wires?

thanks for your reply, so take an earth to the fan anyway. and a live and a neutral from the switch to connect to the 2 brown wires.

thanks for your reply, so to clarify i need to take the wires from the actual light fitting to a pull cord switch, then from the pull cord switch to the extractor fan. The 2 brown wires on the extractor fan, do i just basically put a red and black to these? the earth you nentioned to take...

Just bought a standard extractor fan no timer. it has 2 wires both brown, as it does not need an earth. I want to wire this extractor with a separate pull cord switch so you can switch it on/off as required. My light pull cord switch has red/black and earth. Can i take a wire from this...