Search results

Thanks mate i will give it a go cheers

bit of a split decision here , one saya i should turn water off in street and one sais i don't need to, which is best ? so the ptfe tape goes under the gland nut ?? thanks

I have a small drip coming from the gland nut in my main stopcock, i was going to put some ptfe tape round it, is it necessary to turn the water off in the street before loosening the gland nut ? thanks

can anyone tell me why i am not getting any hot water from my bath tap when i am getting hot water from my other taps ? thanks

Can anyone help ?? i have a thermostatic shower in my bathroom and i am only getting hot water through every now and then, is the valve needing replaced or is there a fix ? some plumber said it needed some kind of washer but i don't see how fitting a washer will give me continuous hot water, i...

could anyone tell me if denso tape is suitable for a very small drip coming from my toilet waste or is there another product which will seal the drip ??? thanks

Hi I am replacing my plastic low level cistern with a china one, is there anything i should know before intalling it or is it pretty straight forward, it has a set of brackets i presume these suport the weight of the cistern. Do i fit the brackets first then the cistern and then the fluhpipe or...

it's a cylinder which is in a cupboard right behind the bath and at same level as bath, storage feeding both taps, suplies are fitted correctly, other taps seem fine, the noise is like a loud humming or vibrating sound, hopes this helps and thanks for your input.

can anyone help here, i fitted a bath shower mixer (thermostatic) and the shower part seems fine but when i turn the temp down the flow of water comes to a trickle also when i try fill a bath the cold water tricles out and makes a horrible noise, any ideas what could be wrong and any fixes ...

sorry mike, there are no markings on it at all !

any advice is apreciated, i have a thermostatic bath shower mixer, when it is set in bath mode the temperature is fine but when in shower mode the water is scalding hot, do i need a new one or can it be fixed ???? thanks

cheers mate, just thought it might rock or wabble if feet not screwed down, but the feet don't have screw holes anyway so will give it a go. Thanks

when fitting a shower tray does the adjusting of the feet give it enough stability or should there be additional support ????

i know there should be a slight difference in temperature between the two pipes but this is quite a big difference, i wouldn't say stone cold but not far off it . thanks

Hi guys can anyone shed a bit of light on why the pipe on the lockshield side of my rad is cold and the trv side is hot, and how to fix this ???? thanks

thanks tony does it sound like a fan problem ???

Hi Guys Does anyone have any ideas of what would cause a boiler to vibrate continuously, my father in law has a baxi wall mounted boiler, it's about 20 years old and works fine apart from this vibrating noise, he had a guy look at it and he said he needed a new boiler, not sure if this is right...

i have a close couled wc suite and the syphon needs re placed, trouble is that when i put it back together i get a leak from the nuts and bolts that hang from the metal plate, i have had the cistern off umpteen times but is still leaking, i was told to put plumbers mate on it, but where would i...

thanks not done any work on pipes, could air lock occur if not tampered with pipes ???

Thanks in advance for any help guys i have hot water in my downstairs taps but not in my upstairs bath or basin taps, any idea of the problem ???