Search results

Hi, we have had around 5 new raidiators put into our Centeral Housing house and the two old ones have sludge build up in them so we recently put a cleaner in our central heating system to clean out the sludge, but i have noticed that none of old the heaters are warming up. the new...

hi, i have one of the above toasters and it has just all of a sudden stopped working, its very hardly been used around once every three days hence its very clean inside and out. any one know what else might be wrong with it, ive check the fuse and opened it up to take a look but can see...

Hi, we have just had the rented house re done up. ie all new plaster, new coving, new wood skirting and wood doors can anyone give us some tips on painting the house, i have been reading that the walls should be painted with white paint first, does this have to paint thinned down or not. i...

We have a commercial freezer its made by sadia but im not sure of the model number. its a upright one and has ellments on each self. the problem we are having is that the top selfs have started getting ice on them. the top self is very bad and is full of ice, this is manly at the front of the...

hmm thanks for the info, seems very informative, thank you again i think finding a local surveying firm i think should be a start, in regards to parking the house next door was very old and a dump totally, it had no front door for quite a few years and the council bought it and turned it...

anyone ?

Hi, We are thinking of converting our house into two flats, has anyone had any experiance on this ie what precuations need to be taken into account and if planning permission is needed ? also if we need premission do we need to get plans drawn up and where is the best place to do this ...

Hi, i have a bathroom tap (see attached picture) and the problem i am getting is that when i turn the knob (marked in the red circle) for the water to go striaght to the shower head it doesnt make all the water go to the shower and instead half the water comes down through the tap and half...

hi, i have the following angle grinder bosch pws - 600 but it has stopped working and requires new bushes, does any one know of a place where i can get them from i have tried bosch but they want the half the price it will cost me to get a new one. thanks any numbers or website...

hi, i know this might have been asked before but i couldnt find anything in search i would like to know a suitable place for my car jack and axle stand im going to try and post a image of the under neath of my car, the car is a vauxall corsa '02 and a peugeot 306 '96 thanks in advance.

Hi, i have a whirpool washing machine 1000, the problem i have is that the water doesnt drain, we have had a few service people come out over the years on many machine and so far we have only seen them take out a pipe out and then open a screw at the back and then close it after a while...

just want to add onto this another slight problem, the hot water doesnt come on at all sometimes, we had the microswitch replaced some time ago does anyone know when i can get one from and how hard it is to fit thanks in advance

anyone know of a cause/solution

Hi, we have has this bolier for around 5 years the water is medium not too hard and not too soft. The problem we have is that sometimes when we put the hot water on the lights go up on after the other but as it tries to turn the flame on it cuts off, or sometimes it cuts off right after...