Search results

Fittings

Hi every one A mate has had double glazing fitted. I noticed that they have fitted the glass from the outside securing it with the pvc bead. I mentioned that what was to stop anyone of popping off the bead and removing the glass Any Regs on fitting the glass. I live in Scotland Cheers

Hi John Where did you get the kit from? Thanks for the info everyone

Hi No I just want one for my shed

Hi I am looking for a manufacturer that sell shed benches in kit form. they all seem to be in the States Any Ideas, cheers

cheers everyone, i'll look into it

It is a MEM Memera 21 How do you upload a photo[/list]

It the total , the od of the cable

I think it what was left from my mates previous job, I measured the dia. I'll try and get a photo.

Hi Guys I am replacing my wooden shed to a metal shed. I have already have electric in the shed. This is from my main ELCB thro a 16amp mcb, to a switch. On the other end of the switch is 10mm dia armour cable. This runs to the shed approx 24m. It is connect to a consumer unit 16amp and 5...

Yea Your right Whats an ID situation?????

The Gassy People have arrived Found out when i run the hot water the pressure dropped to 10 mbar He replaced the regulator at the meter and everything is ok This was done free of charge (bounus :D ) Thanks for the info and advice Cheers Frank

Cheers for that i'll get in touch with the gassy people Up here in Scotland the Gas is free cause we supply it!!!! lol

There is approx 7 x 22mm elbows on the 22mm pipework to the boiler and approx 13m in length. Boiler is working ok 2 x 22mm elbows to hob and 22mm pipe is reduced to 15mm for connection in Hob. The length of pipe is approx 5m and the 15mm is .5m By the way on the last reply from WDIK what...

Hi The pipe from the meter is 22mm

Hi Mike Which pipe is to be uprated , the one from the meter to the boiler or before the meter Frank

Hi Everyone Boiler make Baxi 105e . Gas Pipe to boiler 22mm Gas Pipe to Hob 22mm The problem is this: When my boiler flashes for CH or HW my cooker hob gas pressure drops off. I have had the main gas pressure checked at the meter and that is ok 22mbar. Can you adjust the gas flow...

Hi Everyone I remember sometime ago if you needed to fit an metric copper pipe to an imperial there was an olive you could get with a green dot on it. (1/2" to 15mm) Any ideas where you can get them. Cheers