Search results

Thanks for your reply. I have had a look for a fused spur unit, the only one I can find is in the kitchen that operates the flourescent lighting under the cupboards (these lights work fine).

Checked both switches previously and all wires appear connected and secured correctly, and the wires in the light all appear to be connected correctly

Hi, Hoping someone can help with my problem. I recently changed the hall way light from a rose fitting to a chrome light. The light worked for about a month then when I turned it on one day I heard a noise as though it had blown. Since then I have been unable to get it to work. Also the...

thanks for your replies

Hi, hoping someone can help. I have a Trianco Tro 15/19 which I suspect has been in since the house has been built about 22 years ago. We moved in about 6 months ago. If the control panel is switched on the boiler does not power up and the lock out light is on. If you press the reset...

Thank you for your replies. The only name on the boiler I can find is Glowworm Energysaver. It has no further model numbers that I can see. Just to confirm that the noise can start as soon as the boiler switch is turned on but the heating may be yet to come on, it can last anywhere from 15...

Hi I have a Glowworm Energy Saver Boiler it was installed about 7-9 years ago. I have been away throughout the summer so have not used the boiler until 2 weeks ago. Since I have turned it on the boiler makes a loud buzzing noise and then gradually fades out, it doesn't do this all the...

This is the first time I have used this sight and I will certainly use again, I appreciate all your advise. Many thanks

You were all right, changed the flow switch and I now have heating!!! And much cheaper than the PCB!!! Thanks all for your advice

When you look at the relay you can see it sparking when it cuts out and the box is slightly black, is this normal? Would the Flow switch cause the relay to spark in this way if it was faulty. Thanks for your advice in advance

Does anyone know if you can just swap the relay on this model or do you need to replace the whole board? Cheers

Had an engineer out to have a look at it and it looks like it is the PCB that needs replacing. The relay seems to spark when the flames cut out.

Many thanks for your advice

In your opinion would it be the PCB that would need replacing? I was hoping that it would be something that could be fixed without a part so that I had heat for Christmas. Thanks Steve

I am having a problem with my Baxi Bahama 100 Combi boiler. It turns on and runs for about 20 seconds and then cuts out. It then relights after about 2 minutes and then cuts out again. I have replaced the flame sensing electrode however this has made no difference. Any ideas?