Search results

OK thanks - will try!

I have a Vandy mixer tap which is leaking from the top (photo 1). I looked up how to replace a mixer tap and understand it is bolted to the sink from underneath. However the sink is on a base which it is sealed to (photo 2). From underneath there is a hole and I can feel with my fingers (just...

Hi Bled a radiator which did the trick. Have found wet tissue in one of radiator pipes in the bathroom which would explain why I didn't notice a damp smell. Looks like the nut between the radiator adjustor nob and the radiator is faulty so will have to investigate whether it's a job I can do...

Thanks for getting back. Firstly how do I reduce the water pressure back to 1 bar???? I assumed I could do this by letting the boiler run and it would naturally lose pressure as in the past... When the boiler was serviced the engineer set the pressure to about 1bar and when the boiler came...

I have done quite a lot of reading on the web about this common problem. At the moment the pressure drops to 0 when cold and remains at 0.5 when boiler is on. Recently the boiler got serviced and the guy pointed out the pressure was too low and increase the pressure by turning the tap under...

Thanks. Will let you know how I get on :wink:

That sounds like a great idea :) BUT I tried to do this before (arrange the levers) and completely screwed up. Apparently you have to arrange them in a fan position - is that right? (I just put one on top of other). Is there a set of instructions you can point to? (I guess I could look at...

Thanks for your help Yes it was a front door lock. I moved in a month ago and apparently the lock is less than a year old and used to work but was completely jammed when I tried to use it. The local locksmith said he could fix it with the missing lever but there you are. I appreciate...

Thanks for your attention Attached are photos of boths sides of lock, one of it open and another of two keys - I have forgotten which one is the right one for the lock :oops: I am not sure how to attach but have created an album and assume you can see the pictures from there? Thanks...

I took the above apart to try to fix it and unfortunately lost one of the levers :( I now have two levers with no 6 and one with no4 and one with no 5. So can anyone tell me which lever I have lost and where I can obtain a replacement? The mortice lock is WO2005/054608 Thanks for any help...