Search results

Just for clarity I've sent an enquiry to this one:- http://www.cctvdirect.co.uk/ Any opinions on these two companies?? CCTV Direct and CCTV Direct UK ??

[/url] This is the company I assumed you ment in your original post. Didn't realise there were two companies with almost identical names!! Very confusing. CCTV Direct do seem to have a better website and more options. Not sure who is the best one though. Would need to get advice from the CCTV...

Thank you, I've sent them an e-mail for some information :D

Thank you for the information, I'll take a look at the ones you have suggested. Any other advice would be appreciated. Can you advise where you bought them from?

Hi I'm looking to purchase a DVR for a 4 camera CCTV home system. I would like the DVR to be capable of the following:- My preferred option would be D1 resolution on all 4 channels at 25FPS (real time) or alternatively 12FPS on all 4 channels. What reliable and good quality D1 DVR's...

Hi I went the the local plumbing supplies wholesaler today and they recommended these valves:- Altecnic Intaball Full Bore Valves 15mm They look good quality, have you guys used these and are they good quality valves? Thanks

Thank you for all the advice, it's been very helpful :D

Thank you for the information, thats really helpful. I'll fit the PB300T from now on, was just curious what had happened to these valves. I suspected it may have been replaced, now the companies were merged. I have used the Pegler PB300T in the past and it seems to be good quality.

Does anybody know who makes these Full Bore Ball Valves and if they are still available. I thought they were Yorkshire, however can't find them on there website, have they been replaced by the Pegler ones? Thanks

Who makes these ball valves and are they still available? (maybe Yorkshire?)

Hi, thank you also for your advice :D In our area the water pressure is poor (approx. 1 bar), so we have had installed a fully pumped system, fed from two large water tanks. Which has boosted the pressure to between 2.5 to 3.5 bar and the flow is now sufficient to run two showers without...

Thank you for the advice :D In the past I have used the Pegler full bore ball valves with the t bar, however as you say they can be unsightly behind a basin or toilet. What good quality make of full bore screwdriver isolating valve would you recommend? Or are they all pretty much the...

Hello Just wondered which type of valve would be best to use for the basin (monobloc tap with flexi tails) and toilet in my bathroom. Is it okay to use a standard 15mm isolation valve with screwdriver quarter turn or is it best to use a 15mm quarter turn full bore ball valve to prevent any...

Hello I've now fitted over 100 of these downlights (Halers / Collingwood H2 / EvoLED Dimmable Downlights) with no issues. However recently two have failed shortly after installation. Has anybody else experienced any failures or aware of any issues? I have sent an e-mail to supplier to...

No need to support the waste behind the ped no. The hot and colds may need it depending on where they come from. If you're in a new build with speedfit sticking out the floor behind the ped, it'll want clipping somehow. If its copper (particularly if they're coming out of the wall half way up...

Thank you for the advice, I'll use the 2 inch pipe as planned and keep the height of the shower tray as low as possible. I should be able to get a fall of 60mm over the 3 metre run and the shower tray will be approx. 170mm high. I will install a HepVO waste on the basin as well :)...

Can anybody advise me on this?? Thanks :)

Hello I'm currently installing a new shower and basin. The drain pipe to the stack will be 2" (55mm) pipe which currently has a fall of 35mm over a 2.8 metre run with one swept bend an two 45 degree bends. Should I raise up the shower even further to increase the fall on the drain (is the...

deleted