Search results

Hi I'm just about to replace our oven and hob, the new hob is rated at 7kw the old one was 6kw, and the old over was 2.4 kw and the new one is 1.8kw. There is a cooker control switch on the wall and the connector box is situated behind the oven under the worktop. The radial circuit...

sorry i can't help with this one but if you call the aa or rac they may be able to help with an idea or two, have you called your local bmw dealer and asked the service manager (there are usually ways to over come these things, i've opened nissan, vw and toyota boots in the past but not bmw so...

Hi, I hope you can help. A friend has had his lounge knocked through to the dining room, with a RSJ supporting the wall. The existing plaster is about 3/4 deep. The RSJ will need to be boxed in and angle put on the newly formed opening. I presume i cut a strip of plaster down the wall to...

try www.findapart.co.uk it costs if you give them your mobile number and recieve texts, i just fill in the email thing.

ok thanks for all the advice. going to get a sparks to change the consumer board and check the cable to the shower. any idea what sort of cost a new consumer unit should be? (just the fitting) its a small 2 bed one level flat. thanks again

thanks, a general builder friend said the shower installation was fine but he didn't know about the old wylex boards.

its no more than 4 metres, probably really only 2. its the same size as the cooker, where does the 10mm come from, what is it a measure of? the cable is about 13mm wide and 5mm thick. thanks

hi i've just fitted a shower at my girlfriends flat, and it's a 10.8kw unit, the old one was a 7kw so i've changed the fuse in the consumer unit (an old wylex one) for a 45amp fuse with a trip switch. is 45amps too much for the old wylex unit? the fuse gets warm when the shower is being...